Electric power pressure washers
|
MGA Series 2 900 Watt Oil Lubricated 1 Gallon Gas Portable Generator
Engineered by professionals, this sturdy generator is built for rough jobs. Designed with precision, this oil lubricated generator is economy efficient and has one of the lowest noise levels in the industry. The MGA2901 is built as a recoil type for easy starting. This model is equipped with a 1 gallon fuel tank which allows for a 5 hour run time, delivering you reliable power and performance when and where you need it. Features: - Equipped with electronic ignition for easier and more convenient running - 1 Gallon fuel tank for longer run time and reduced noise - 6 HP Air cooled 4 - cycle OHV engine for a reliable and dependable product that delivers in the industry - Low 70 dB noise level allows for extremely quiet use Specifications: - Voltage regulation: condenser load compensation - Frequency: 60 Hz - Maximum output: 2,900 W - Rated Output: 2,500 W - Rated voltage: AC 120V (20.8A) - Power factor: one hundred procent - Engine type: 6.0 Hp, air-cooled, 4-cycle OHV - Fuel unleaded gasoline - Fuel tank capacity: 1.0 gal - Continuous operating hours: 5.0 - Lubricating oil / oil volume: SAE 10W-30 / 0.63 qts - Ignition system: electronic ignition - Starting system: recoil starter - Noise level: (7m) 70 dB - Dimensions (LxWxH) 22.5" x 16.7" x 16.9" - Dry weight: 95 lbs. - Equipped with oil sensor lamp - Warranty: 2 year limited - Home Family - Furniture - Engineered by professionals, this sturdy generator is built for rough jobs. Designed with precision, this oil lubricated generator is economy efficient and has one of the lowest noise levels in the industry. The MGA2901 is built as a recoil type for easy starting. This model is equipped with a 1 gallon fuel tank which allows for a 5 hour run time, delivering you reliable power and performance when and where you need it. Features: - Equipped with electronic ignition for easier and more convenient running - 1 Gallon fuel tank for longer run time and reduced noise - 6 HP Air cooled 4 - cycle OHV engine for a reliable and dependable product that delivers in the industry - Low 70 dB noise level allows for extremely quiet use Specifications: - Voltage regulation: condenser load compensation - Frequency: 60 Hz - Maximum output: 2,900 W - Rated Output: 2,500 W - Rated voltage: AC 120V (20.8A) - Power factor: one hundred procent - Engine type: 6.0 Hp, air-cooled, 4-cycle OHV - Fuel unleaded gasoline - Fuel tank capacity: 1.0 gal - Continuous operating hours: 5.0 - Lubricating oil / oil volume: SAE 10W-30 / 0.63 qts - Ignition system: electronic ignition - Starting system: recoil starter - Noise level: (7m) 70 dB - Dimensions (LxWxH) 22.5" x 16.7" x 16.9" - Dry weight: 95 lbs. - Equipped with oil sensor lamp - Warranty: 2 year limited - 459748799
- MGA Series 2 900 Watt Oil Lubricated 1 Gallon Gas Portable Generator
|
|
18 Slanted Wire Pick Racks Storage Unit with Dividable Grid Bins with Optional Mobile Kit
Our 18" heavy-duty Slanted Wire Pick Rack Complete Package Unit comes with 3 bin package options and a shelf unit. There is also an optional Mobile Kit which includes 2 pairs of 5" x 1 1/4" polyurethane swivel casters. Features: - 800 lb load capacity per shelf - 1200 lb total load capacity with Mobile Kit - Wire shelves prevent dust and dirt build up and allow for sprinkler penetration - Durable hard chrome finish - Resists corrosion - Compatible with an optional Mobile Kit - 3 slanted shelves and 2 flat - Shelf Unit Dimensions: 72" H x 48" W x 18" D Bin Package Options: - 3 1/2" H x 10 7/8" W x 16 1/2" D - qty. 16 - 6" H x 10 7/8" W x 16 1/2" D - qty. 16 - 8" H x 10 7/8" W x 16 1/2" D - qty. 16 Note: One bin color per unit only. - Home Family - Furniture - Our 18" heavy-duty Slanted Wire Pick Rack Complete Package Unit comes with 3 bin package options and a shelf unit. There is also an optional Mobile Kit which includes 2 pairs of 5" x 1 1/4" polyurethane swivel casters. Features: - 800 lb load capacity per shelf - 1200 lb total load capacity with Mobile Kit - Wire shelves prevent dust and dirt build up and allow for sprinkler penetration - Durable hard chrome finish - Resists corrosion - Compatible with an optional Mobile Kit - 3 slanted shelves and 2 flat - Shelf Unit Dimensions: 72" H x 48" W x 18" D Bin Package Options: - 3 1/2" H x 10 7/8" W x 16 1/2" D - qty. 16 - 6" H x 10 7/8" W x 16 1/2" D - qty. 16 - 8" H x 10 7/8" W x 16 1/2" D - qty. 16 Note: One bin color per unit only. - 459749222
- 18 Slanted Wire Pick Racks Storage Unit with Dividable Grid Bins with Optional Mobile Kit
|
|
Mul-T-Mount 25 298 BTU's 3-Lamp Infrared Heater
The Mul-T-Mount 25,298 BTU's 3-Lamp Infrared Heater is a great way to add warmth to any industrial space during those cold days and nights! Features clear quartz heating elements for direct wire connection, 20-gauge stainless steel housing, and gold anodized one-piece reflector offered in the 30, 60, and 90 degree symmetrical heat patterns. Overhead infrared heaters for snow and ice conrtol, outdoor spot heating and all indoor heating applications. Available in 30, 60, 90 degree symmetrical reflector pattern and 208, 240, 277, and 480 volts as options to choose from. Please note, this heater requires direct wire installation by an electrician Features - Clear quartz lamp heating elements for direct wire connection - Gold anodized one-piece reflector offered in 30, 60, 90 degree symmetrical heat patters for various distribution of infrared heat - 20-gauge stainless steel housing - Built-in surface mounting bracket allows for fixture adjustment up to a 40 degree horizontal tilt - Operate on either single or three phase wiring - Provide maximum heating in less than 60 seconds - Unit provides the ability of staging and zone control flexibility - Provide 50% higher watt densities than two element units - Gold anodized aluminum reflectors and end caps provide maximum reflectivity and longevity for a variet of applications - Three clear quartz lamps included - Overall dimensions: 33" H x 21.5" W x 10.875" D - Net weight: 33 lbs - Home Family - Furniture - The Mul-T-Mount 25,298 BTU's 3-Lamp Infrared Heater is a great way to add warmth to any industrial space during those cold days and nights! Features clear quartz heating elements for direct wire connection, 20-gauge stainless steel housing, and gold anodized one-piece reflector offered in the 30, 60, and 90 degree symmetrical heat patterns. Overhead infrared heaters for snow and ice conrtol, outdoor spot heating and all indoor heating applications. Available in 30, 60, 90 degree symmetrical reflector pattern and 208, 240, 277, and 480 volts as options to choose from. Please note, this heater requires direct wire installation by an electrician Features - Clear quartz lamp heating elements for direct wire connection - Gold anodized one-piece reflector offered in 30, 60, 90 degree symmetrical heat patters for various distribution of infrared heat - 20-gauge stainless steel housing - Built-in surface mounting bracket allows for fixture adjustment up to a 40 degree horizontal tilt - Operate on either single or three phase wiring - Provide maximum heating in less than 60 seconds - Unit provides the ability of staging and zone control flexibility - Provide 50% higher watt densities than two element units - Gold anodized aluminum reflectors and end caps provide maximum reflectivity and longevity for a variet of applications - Three clear quartz lamps included - Overall dimensions: 33" H x 21.5" W x 10.875" D - Net weight: 33 lbs - 459749483
- Mul-T-Mount 25 298 BTU's 3-Lamp Infrared Heater
|
|
GenShed
The GenShed shelter provides a convenient, rigid, weatherproof, lockable place to store and operate a portable generator for backup power when connected to a transfer switch. It provides out-of-the-way protection for your generator, and frees up space in your garage for other items.Exhaust fumes and heat exit the GenShed shelter through the magnetic exhaust system while additional heat is dissipated through louvers mounted on the walls and rear of the enclosure. The blower fan connects to a standard 120 volt receptacle on the generator to introduce fresh air to the generator engine, and only runs when the generator is running. The high temperature sensor switch will shut off the generator in case of overheating. Features: -Factory Installed Louvers -Patent-Pending Magnetic Exhaust system -Pre-Installed Blower Fan (connects to 120V receptacle on Generator -High Temperature Sensor Switch Please Note: ALL components included in the GenShed shelter kit MUST be installed in order for it to operate as designed and to avoid property damage or personal injury. Not all portable generators are compatible with the GenShed shelter!! Your portable generator MUST have a tubular pipe and/or single exhaust hole and a steel exhaust cavity for the magnet to work. Baffled exhausts or exhaust points with perforated metal holes or louvers will NOT work with the GenShed shelter. Please check the Generator Compatibility Chart for a list of current model generators that have been verified by our factory. The GenShed shelter must be located no less than 18" from a non-combustible surface and no less than 5 feet from a door or window opening. Generator should be placed in the shelter with the exhaust facing the back or side. Magnetic Exhaust System must be affixed to the muffler pipe and the flexible pipe must be routed to the pre-drilled hole that allows the straightest path outside. Installation Manual Compatibility Chart - Home Family - Furniture - The GenShed shelter provides a convenient, rigid, weatherproof, lockable place to store and operate a portable generator for backup power when connected to a transfer switch. It provides out-of-the-way protection for your generator, and frees up space in your garage for other items.Exhaust fumes and heat exit the GenShed shelter through the magnetic exhaust system while additional heat is dissipated through louvers mounted on the walls and rear of the enclosure. The blower fan connects to a standard 120 volt receptacle on the generator to introduce fresh air to the generator engine, and only runs when the generator is running. The high temperature sensor switch will shut off the generator in case of overheating. Features: -Factory Installed Louvers -Patent-Pending Magnetic Exhaust system -Pre-Installed Blower Fan (connects to 120V receptacle on Generator -High Temperature Sensor Switch Please Note: ALL components included in the GenShed shelter kit MUST be installed in order for it to operate as designed and to avoid property damage or personal injury. Not all portable generators are compatible with the GenShed shelter!! Your portable generator MUST have a tubular pipe and/or single exhaust hole and a steel exhaust cavity for the magnet to work. Baffled exhausts or exhaust points with perforated metal holes or louvers will NOT work with the GenShed shelter. Please check the Generator Compatibility Chart for a list of current model generators that have been verified by our factory. The GenShed shelter must be located no less than 18" from a non-combustible surface and no less than 5 feet from a door or window opening. Generator should be placed in the shelter with the exhaust facing the back or side. Magnetic Exhaust System must be affixed to the muffler pipe and the flexible pipe must be routed to the pre-drilled hole that allows the straightest path outside. Installation Manual Compatibility Chart - 459748523
- GenShed
|
|
2.0 GPM 1 400 PSI Mini Power Pack Cold Water Electric Pressure Washer
This medium sized pressure washer is the perfect washer for everyday commercial use. It comes with the Dirt Killer nozzle which doubles the cleaning efficiency. The K 1120T Mini Power Pack Cold Water Electric pressure washer design gives multi-hour bypass and run-dry capability preventing accidental pump damage. There is a built in hose reel that comes with a 50' wire braided hose. The pressure washer has exit side chemical injection and comes with a professional gun-jet lance and safety coupler screw connections. Features: -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage -Dirt Killer nozzle doubles cleaning efficiency -Built-in hose reel -Professional gun-jet lance -50' wire braided hose on hose reel -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet (high-pressure wash/soap) -Dirt Killer turbo nozzle Applications: -Light Commercial Duty: -Hotel and buildings -HVAC maintenance -Screen-printing -Home -Boat or vehicle Specifications: -1,400 PSI -2.0 gallons per minute -Cleaning power: 2,800 -Kranzle AZ industrial grade pump -Kranzle adjustable pressure unloader -110 volt, 15 amps TEFC electric motor with 25' cord -Steel frame with plastic cover that holds all accessories -Inlet water filter -Shipping weight: 70 lbs -Dimensions: 32" H x 13" W x 12" D - Home Family - Furniture - This medium sized pressure washer is the perfect washer for everyday commercial use. It comes with the Dirt Killer nozzle which doubles the cleaning efficiency. The K 1120T Mini Power Pack Cold Water Electric pressure washer design gives multi-hour bypass and run-dry capability preventing accidental pump damage. There is a built in hose reel that comes with a 50' wire braided hose. The pressure washer has exit side chemical injection and comes with a professional gun-jet lance and safety coupler screw connections. Features: -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage -Dirt Killer nozzle doubles cleaning efficiency -Built-in hose reel -Professional gun-jet lance -50' wire braided hose on hose reel -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet (high-pressure wash/soap) -Dirt Killer turbo nozzle Applications: -Light Commercial Duty: -Hotel and buildings -HVAC maintenance -Screen-printing -Home -Boat or vehicle Specifications: -1,400 PSI -2.0 gallons per minute -Cleaning power: 2,800 -Kranzle AZ industrial grade pump -Kranzle adjustable pressure unloader -110 volt, 15 amps TEFC electric motor with 25' cord -Steel frame with plastic cover that holds all accessories -Inlet water filter -Shipping weight: 70 lbs -Dimensions: 32" H x 13" W x 12" D - 459748528
- 2.0 GPM 1 400 PSI Mini Power Pack Cold Water Electric Pressure Washer
|
|
Tote Tray and Steel Box Package
This package is extremely convenient for all of your tool storing needs. It features a low profile solid steel box in a variety of sizes, a tote tray, and a spray can holder. All come in a durable Red Powder Coat finish and create optimal space and organization. Low Profile Steel Box These low profile solid steel boxes every have a non-lockable lid and a Red Powder Coat finish. They are great for carrying and storing tools and other items and close easily with a latch or snap. They do not come with a carrying handle. Features: -Comes in a Red Powder Coat finish -Available in many sizes -Solid steel construction -Box closes with latch or snap -Non-lockable lid -Stores tools -Limited lifetime warranty Model Overall Box Dimensions Number of Latches 1600 1" H x 6.25" W x 2.5" D 0-snap close lid instead 1601 1.25" H x 6.25" W x 3.44" D 1 Latch 1602 1.5" H x 9" W x 3" D 1 Latch 1603 1.75" H x 10" W x 4.5" D 1 Latch 1605 2" H x 12" W x 4.5" D 1 Latch 1604 2.5" H x 12" W x 5.88" D 1 Latch 1606 2.5" H x 14" W x 5.88" D 1 Latch | 1607 | 2.5" H x 15" W x 5.88" D | 2 Latches | | 1608 | 2.5" H x 16" W x 5.88" D | 2 Latches | | 1609 | 2.5" H x 17" W x 5.88" D | 2 Latches | | 1610 | 2.5" H x 18" W x 5.88" D | 2 Latches | | 1611 | 2.5" H x 19" W x 5.88" D | 2 Latches | - Home Family - Furniture - This package is extremely convenient for all of your tool storing needs. It features a low profile solid steel box in a variety of sizes, a tote tray, and a spray can holder. All come in a durable Red Powder Coat finish and create optimal space and organization. Low Profile Steel Box These low profile solid steel boxes every have a non-lockable lid and a Red Powder Coat finish. They are great for carrying and storing tools and other items and close easily with a latch or snap. They do not come with a carrying handle. Features: -Comes in a Red Powder Coat finish -Available in many sizes -Solid steel construction -Box closes with latch or snap -Non-lockable lid -Stores tools -Limited lifetime warranty Model Overall Box Dimensions Number of Latches 1600 1" H x 6.25" W x 2.5" D 0-snap close lid instead 1601 1.25" H x 6.25" W x 3.44" D 1 Latch 1602 1.5" H x 9" W x 3" D 1 Latch 1603 1.75" H x 10" W x 4.5" D 1 Latch 1605 2" H x 12" W x 4.5" D 1 Latch 1604 2.5" H x 12" W x 5.88" D 1 Latch 1606 2.5" H x 14" W x 5.88" D 1 Latch | 1607 | 2.5" H x 15" W x 5.88" D | 2 Latches |
