Electric power pressure washers
|
1 100W Generator
A powerful 2.5 horsepower, 1,100 watt generator with 85cc and an overhead valve (OHV) engine. The fully enclosed design reduces sound output, protects the generator and is impact resistant. Features: - 4.2 hours runtime from 1.1 gallon fuel tank - Recoil starter system with electronic ignition makes for easy starting and reliable, consistent service - DC output with circuit breakers for consistent electrical flow with overload protection - Innovative cooling design with large cooling fins engineered into the crankcase, cylinder and mounting base - Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low - Cast iron cylinder increases durability and extends engine performance - Large, heavy duty air and fuel filters with high capacity to reduce service intervals Specifications: Generator - Maximum Output Current: 1,100W; 9.2A - Rated Output Current: 900W; 7.5A - Volts AC (60 Hz): 120 - Volts DC (AMPS) 12 (8.3) Engine - Maximum H.P./RPM: 2.5/3,600 - Displacement (cc): 85 - Fuel tank capacity: 1.1 gallons - Continuous Operation: 4.2 hours - Noise level: 59 dB Warranty: - One year limited warranty - Home Family - Furniture - A powerful 2.5 horsepower, 1,100 watt generator with 85cc and an overhead valve (OHV) engine. The fully enclosed design reduces sound output, protects the generator and is impact resistant. Features: - 4.2 hours runtime from 1.1 gallon fuel tank - Recoil starter system with electronic ignition makes for easy starting and reliable, consistent service - DC output with circuit breakers for consistent electrical flow with overload protection - Innovative cooling design with large cooling fins engineered into the crankcase, cylinder and mounting base - Protected with built-in oil sensor that shuts off the ignition if the oil level drops too low - Cast iron cylinder increases durability and extends engine performance - Large, heavy duty air and fuel filters with high capacity to reduce service intervals Specifications: Generator - Maximum Output Current: 1,100W; 9.2A - Rated Output Current: 900W; 7.5A - Volts AC (60 Hz): 120 - Volts DC (AMPS) 12 (8.3) Engine - Maximum H.P./RPM: 2.5/3,600 - Displacement (cc): 85 - Fuel tank capacity: 1.1 gallons - Continuous Operation: 4.2 hours - Noise level: 59 dB Warranty: - One year limited warranty - 459748796
- 1 100W Generator
|
|
Complete Storage Unit with 156 Classic Bins
This Complete Unit is a louvered panel that comes complete with 156 Classic Bins of varying sizes. Features: - 16 gauge cold rolled steel - Gray baked enamel finish - Overall Dimensions: 66" H x 25" W x 35" D Bin Package: - 2" H x 3 7/8" W x 4" D - qty. 36 - 2 7/8" H x 3 7/8" W x 7" D - qty. 54 - 2 7/8" H x 8 7/8" W x 7" D - qty. 24 - 5 1/8" H x 5 7/8" W x 10 1/4" D - qty. 12 - 4 7/8" H x 4 5/8" W x 14" D - qty. 14 - 6 1/8" H x 8 1/8" W x 13 1/2" D - qty. 16 Note: One bin color per unit only. - Home Family - Furniture - This Complete Unit is a louvered panel that comes complete with 156 Classic Bins of varying sizes. Features: - 16 gauge cold rolled steel - Gray baked enamel finish - Overall Dimensions: 66" H x 25" W x 35" D Bin Package: - 2" H x 3 7/8" W x 4" D - qty. 36 - 2 7/8" H x 3 7/8" W x 7" D - qty. 54 - 2 7/8" H x 8 7/8" W x 7" D - qty. 24 - 5 1/8" H x 5 7/8" W x 10 1/4" D - qty. 12 - 4 7/8" H x 4 5/8" W x 14" D - qty. 14 - 6 1/8" H x 8 1/8" W x 13 1/2" D - qty. 16 Note: One bin color per unit only. - 459749134
- Complete Storage Unit with 156 Classic Bins
|
|
Glenwood Shed 10' x 12'
Glenwood Shed 10' x 12' Easy to assemble tongue and groove pine wood siding - ready to stain! Extra tall 6 feet high walls for easy access and greater head room. This shed features the strength of steel with the beauty of pine wood. Windows sold separately. Features: -Easy to assemble tongue and groove pine wood siding -Ready to stain -Durable galvanized steel frame -Honey-comb backed doors for extra rigidity -Windows sold separately Dimensions: -8.5'H x 10'W x 12'D Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Window Kit- Glenwood Building Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Floor Frame Kit for 10' x 12' and 10' x 14' Buildings -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Roof Strengthening Kit 10' x 12' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included Foundation Kit for 10' x 12' Glenwood Shed -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included - Home Family - Furniture - Glenwood Shed 10' x 12' Easy to assemble tongue and groove pine wood siding - ready to stain! Extra tall 6 feet high walls for easy access and greater head room. This shed features the strength of steel with the beauty of pine wood. Windows sold separately. Features: -Easy to assemble tongue and groove pine wood siding -Ready to stain -Durable galvanized steel frame -Honey-comb backed doors for extra rigidity -Windows sold separately Dimensions: -8.5'H x 10'W x 12'D Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Window Kit- Glenwood Building Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Floor Frame Kit for 10' x 12' and 10' x 14' Buildings -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Roof Strengthening Kit 10' x 12' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included Foundation Kit for 10' x 12' Glenwood Shed -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included - 459748961
- Glenwood Shed 10' x 12'
|
|
Silent Power 1650 Watt Inverter Generator
A hard working generator that operates quietly and efficiently. This generator is light and surprisingly powerful for its size and is everything you need to get the job done up to 1650 watts. Powered by a high quality Subaru engine, this generator is truly industrial grade and has increased fuel efficiency for extended run times. Same day shipping for phone orders placed before 2 pm EST Features: -Industrial grade Subaru engine -Clean, stable power for sensitive electronic equipment including computers, consumer electronics, and electronic tools -Light and compact -High surge-capacity allows for output up to 120% of rated power for up to 20 seconds -Easy starting for demanding appliances and equipment, from RV air conditioners to air compressors and power tools -Embedded heat sensors monitor critical components -Auto shut-off when overload is sensed -Low oil shut-off -Multi-monitor displays: voltage, frequency, hours of operation, and overload condition -Full tubular steel frame for maximum durability -Sound absorbing lining and enclosure -Three layer steel fuel tank -Auto-Power System adjusts the engine speed to meet power requirement -Extra large muffler -Full 2-year limited manufacturer's warranty from Robin Subaru Generator Specifications: -Type: Inverter -Voltage Regulation: Inverter -Frequency/Phase: 60 Hz/Single Phase -Voltage: 120V -Max. Output: 1650 Watts -Max. Amps: 13.8 -Rated Output: 1400 Watts -Rated Amps: 11.7 -dbA Rating @ 7 meters: 59 dbA -Current Protection: Electronic Circuit Breaker and GFCI Engine Specifications: -Engine Type: Subaru OHV -Engine Model: EH09 -Horsepower: 2.4 -Engine Low oil shutdown -Fuel tank capacity: 1.1 Gallons -Continuous Operation (hours @ rated load): 4.0 -Start System: Recoil -2 Receptacles: (GFCI 120 V - 20A Duplex) and (12 V DC Charging) -Indicator Lights: Pilot lamp, overload condition and auto power saver -Idle control: Auto-Power System - Home Family - Furniture - A hard working generator that operates quietly and efficiently. This generator is light and surprisingly powerful for its size and is everything you need to get the job done up to 1650 watts. Powered by a high quality Subaru engine, this generator is truly industrial grade and has increased fuel efficiency for extended run times. Same day shipping for phone orders placed before 2 pm EST Features: -Industrial grade Subaru engine -Clean, stable power for sensitive electronic equipment including computers, consumer electronics, and electronic tools -Light and compact -High surge-capacity allows for output up to 120% of rated power for up to 20 seconds -Easy starting for demanding appliances and equipment, from RV air conditioners to air compressors and power tools -Embedded heat sensors monitor critical components -Auto shut-off when overload is sensed -Low oil shut-off -Multi-monitor displays: voltage, frequency, hours of operation, and overload condition -Full tubular steel frame for maximum durability -Sound absorbing lining and enclosure -Three layer steel fuel tank -Auto-Power System adjusts the engine speed to meet power requirement -Extra large muffler -Full 2-year limited manufacturer's warranty from Robin Subaru Generator Specifications: -Type: Inverter -Voltage Regulation: Inverter -Frequency/Phase: 60 Hz/Single Phase -Voltage: 120V -Max. Output: 1650 Watts -Max. Amps: 13.8 -Rated Output: 1400 Watts -Rated Amps: 11.7 -dbA Rating @ 7 meters: 59 dbA -Current Protection: Electronic Circuit Breaker and GFCI Engine Specifications: -Engine Type: Subaru OHV -Engine Model: EH09 -Horsepower: 2.4 -Engine Low oil shutdown -Fuel tank capacity: 1.1 Gallons -Continuous Operation (hours @ rated load): 4.0 -Start System: Recoil -2 Receptacles: (GFCI 120 V - 20A Duplex) and (12 V DC Charging) -Indicator Lights: Pilot lamp, overload condition and auto power saver -Idle control: Auto-Power System - 461566939
- Silent Power 1650 Watt Inverter Generator
|
|
Wheel Kit
An excellent component to a generator set, this wheel kit is ideal for transporting your generator anywhere. The Pramac Wheel Kit features wheels and handles for all your mobility needs. It is compatible with ES Class, E Class and S Class Series generators. Features: -Tool to aid in transportation of generators -Very easy to use -Includes wheels and handles for efficiency -Compatible with ES Class Series 3000, 5000, 8000 watt generators -Compatible with E Class Series 3750 watt and S Class Series 3100 watt generators - Home Family - Furniture - An excellent component to a generator set, this wheel kit is ideal for transporting your generator anywhere. The Pramac Wheel Kit features wheels and handles for all your mobility needs. It is compatible with ES Class, E Class and S Class Series generators. Features: -Tool to aid in transportation of generators -Very easy to use -Includes wheels and handles for efficiency -Compatible with ES Class Series 3000, 5000, 8000 watt generators -Compatible with E Class Series 3750 watt and S Class Series 3100 watt generators - 460157246
- Wheel Kit
|
|
2200 PSI (Gas Cold Water) Portable Gas Pressure Washer
Designed for many applications, this 4.5 HP Briggs and Stratton pressure is very efficient and user-friendly. Fully equipped with a 25 ft. high pressure hose, this model is highly versatile and flexible. Its detergent injection system allows you to intensify the overall cleaning capabilities. This 2,200 PSI pressure washer includes a stainless steel wand for optimum cleaning efficiency. Compact, powerful, and portable, this model is ideal for a variety of cleaning projects. Features: - Reliable and easy starting - A nozzle designed for every project type - Easy start pump technology - Axial cam pump - Stainless steel spray wand - 25 ft. High-pressure hose - 2" x 8" pneumatic wheels - Detergent injection system - Side-valve engine configuration - High temperature thermal relief - Safety goggles and engine oil included - Project pro precision spray nozzles - Delicate Nozzle: Low pressure, high flow rate for gentle cleaning - General Nozzle: Medium pressure and flow rate for all purpose cleaning - Max Nozzle: high pressure, low flow rate cleans stubborn dirt and grime and cleans hard to revery surfaces Specifications: - 4.5 HP Briggs and Stratton engine - PSI: 2,200 MAX - GPM: 2.2 MAX - Tank size: 1 quart - Weight: 54 lbs. - Warranty: 1 year limited - Dimensions: 22.75"L x 19.4" W x 19.5" H - Home Family - Furniture - Designed for many applications, this 4.5 HP Briggs and Stratton pressure is very efficient and user-friendly. Fully equipped with a 25 ft. high pressure hose, this model is highly versatile and flexible. Its detergent injection system allows you to intensify the overall cleaning capabilities. This 2,200 PSI pressure washer includes a stainless steel wand for optimum cleaning efficiency. Compact, powerful, and portable, this model is ideal for a variety of cleaning projects. Features: - Reliable and easy starting - A nozzle designed for every project type - Easy start pump technology - Axial cam pump - Stainless steel spray wand - 25 ft. High-pressure hose - 2" x 8" pneumatic wheels - Detergent injection system - Side-valve engine configuration - High temperature thermal relief - Safety goggles and engine oil included - Project pro precision spray nozzles - Delicate Nozzle: Low pressure, high flow rate for gentle cleaning - General Nozzle: Medium pressure and flow rate for all purpose cleaning - Max Nozzle: high pressure, low flow rate cleans stubborn dirt and grime and cleans hard to revery surfaces Specifications: - 4.5 HP Briggs and Stratton engine - PSI: 2,200 MAX - GPM: 2.2 MAX - Tank size: 1 quart - Weight: 54 lbs. - Warranty: 1 year limited - Dimensions: 22.75"L x 19.4" W x 19.5" H - 459748044
- 2200 PSI (Gas Cold Water) Portable Gas Pressure Washer
|
|
100' Mini Swivel Reel Kit
In order to achieve optimum performance from your pressure washer, you need the proper accessories, such as a 100' mini swivel reel. It can turn 360 degrees allowing you to pull the hose off in any direction. It is also not recommended for you to use this reel on any machine weighing less than 200 lbs. This model fits any kind of Cam Spray pressure washer, but the SH models require universal bracket. The Q series and TR series do not required any bracket. Features: -Turns 360 degrees allowing you to pull hose off in any direction -Can only hold up to a 100 foot hose -Not recommended for you to use this reel on any machine weighing less than 200 lbs - Home Family - Furniture - In order to achieve optimum performance from your pressure washer, you need the proper accessories, such as a 100' mini swivel reel. It can turn 360 degrees allowing you to pull the hose off in any direction. It is also not recommended for you to use this reel on any machine weighing less than 200 lbs. This model fits any kind of Cam Spray pressure washer, but the SH models require universal bracket. The Q series and TR series do not required any bracket. Features: -Turns 360 degrees allowing you to pull hose off in any direction -Can only hold up to a 100 foot hose -Not recommended for you to use this reel on any machine weighing less than 200 lbs - 459748252
- 100' Mini Swivel Reel Kit in shop
|
|
Manual Transfer Switch for Generators up to 7500 Watts
The most versatile home transfer switch from Gen-Tran! This manual transfer switch offers adjustable installation and an easily expandable design. Flexibility is the name of the game with accommodations for hardwired or plug-in generator connections as well as room for up to 16 circuits! Run your refrigerator, furnace, microwave, lights, TV, well pump, home office etc... Features: -Expandable up to 16 circuits -NEMA 1 cabinet for surface mounting indoors or NEMA 3R unit for outdoor applications -Accommodates hardwired or plug-in generator connections -UL listed with the following breakers: Siemens, Cutler Hammer-BR, Square D-HOM, GE - THQL -Code-gauge metal cabinet with flat front cover and powder coat finish -Wattmeters to help monitor generator loads -Handles both inductive and resistive loads -Branch circuit breakers and mechanically interlocked main breakers -Wiring harness with 24" of flexible conduit and wire connectors Specifications: -Number of circuits: 6 -Max Number of circuits: 16 -Max Amps @ 240V: 30 -Max Generator Watts: 7500 -Included Breakers: (2) 15Amp-1Pole, (2) 20Amp-1Pole, (1) 20Amp-2Pole -NEMA configuration of Male Inlet: L14-30 -A 2-pole breaker is required in load center : 60Amp (supplied by installer) -Dimensions for Indoor Cabinet (NEMA 1): 11.5 X 14.375 X 3.375 inches -Dimensions for Outdoor Cabinet (NEMA 3R): 18 X 18 X 4 inches - Home Family - Furniture - The most versatile home transfer switch from Gen-Tran! This manual transfer switch offers adjustable installation and an easily expandable design. Flexibility is the name of the game with accommodations for hardwired or plug-in generator connections as well as room for up to 16 circuits! Run your refrigerator, furnace, microwave, lights, TV, well pump, home office etc... Features: -Expandable up to 16 circuits -NEMA 1 cabinet for surface mounting indoors or NEMA 3R unit for outdoor applications -Accommodates hardwired or plug-in generator connections -UL listed with the following breakers: Siemens, Cutler Hammer-BR, Square D-HOM, GE - THQL -Code-gauge metal cabinet with flat front cover and powder coat finish -Wattmeters to help monitor generator loads -Handles both inductive and resistive loads -Branch circuit breakers and mechanically interlocked main breakers -Wiring harness with 24" of flexible conduit and wire connectors Specifications: -Number of circuits: 6 -Max Number of circuits: 16 -Max Amps @ 240V: 30 -Max Generator Watts: 7500 -Included Breakers: (2) 15Amp-1Pole, (2) 20Amp-1Pole, (1) 20Amp-2Pole -NEMA configuration of Male Inlet: L14-30 -A 2-pole breaker is required in load center : 60Amp (supplied by installer) -Dimensions for Indoor Cabinet (NEMA 1): 11.5 X 14.375 X 3.375 inches -Dimensions for Outdoor Cabinet (NEMA 3R): 18 X 18 X 4 inches - 459748488
- Manual Transfer Switch for Generators up to 7500 Watts
|
Free Discount Coupon click here Labels and other items buy now
|
7.5' H x 20' W Carport
From the blazing sun to the harshest storms, your precious automobiles need love too. VersaTube carports are perfect for offering the protection and sturdiness that you would expect with 2" x 3" heavy gauge galvanized steel tubing. In an array of lengths and colors, you are sure to find the perfect size to fit any area requiring shelter from the elements. You can easily assemble your carport/shelter on any level surface by following the instructions and by using the ground anchors provided. Features: - Includes all framing and hardware, plus painted steel roofing, vinyl trim, and butyl caulk tape - Quality low-maintenance finish resists stains, dirt retention, chalking and fading - Incorporates recycled steel (67% of all steel is recycled) - Silicon coating for easy cleaning - Many color and length options - 20-year warranty Specifications: - 29-gauge painted steel panels - 80,000 PSI yield strength minimum - Features a 3:12 roof pitch - Can support 30- 70 psf (pounds per square foot) varies on size and anchor method - Can support winds of 70 - 120 mph varies on size and anchor method - Overall dimensions: 7.5' H x 20' W x 20 - 60.5' D Please note: The color option of white yields a lead time of 3-4 weeks. Universal Carport Installation Instructions Versatube Carports Frequently Asked Questions - Home Family - Furniture - From the blazing sun to the harshest storms, your precious automobiles need love too. VersaTube carports are perfect for offering the protection and sturdiness that you would expect with 2" x 3" heavy gauge galvanized steel tubing. In an array of lengths and colors, you are sure to find the perfect size to fit any area requiring shelter from the elements. You can easily assemble your carport/shelter on any level surface by following the instructions and by using the ground anchors provided. Features: - Includes all framing and hardware, plus painted steel roofing, vinyl trim, and butyl caulk tape - Quality low-maintenance finish resists stains, dirt retention, chalking and fading - Incorporates recycled steel (67% of all steel is recycled) - Silicon coating for easy cleaning - Many color and length options - 20-year warranty Specifications: - 29-gauge painted steel panels - 80,000 PSI yield strength minimum - Features a 3:12 roof pitch - Can support 30- 70 psf (pounds per square foot) varies on size and anchor method - Can support winds of 70 - 120 mph varies on size and anchor method - Overall dimensions: 7.5' H x 20' W x 20 - 60.5' D Please note: The color option of white yields a lead time of 3-4 weeks. Universal Carport Installation Instructions Versatube Carports Frequently Asked Questions - 459749532
- 7.5' H x 20' W Carport in stock
|
|
Slider Frame with Gondola and Tip Out Bins
The Gondola System offers the same amount of storage versatility and convenience as our Free Standing Slider Systems. This package comes with a Gondola System as well as 4 bin package options. - Overall dimensions: 77" H x 48" W x 19" D Bin Package Options: - 8 1/8" H x 23 5/8" W x 6 5/8" D - qty. 28 (4 bin cups per unit) - 6 1/2" H x 23 6/8" W x 5 1/4" D - qty. 36 (5 bin cups per unit) - 4 1/2" H x 23 5/8" W x 3 5/8" D - qty. 56 (6 bin cups per unit) - 3 1/8" H x 23 5/8" W x 2 1/2" D - qty. 80 (9 bin cups per unit) - Home Family - Furniture - The Gondola System offers the same amount of storage versatility and convenience as our Free Standing Slider Systems. This package comes with a Gondola System as well as 4 bin package options. - Overall dimensions: 77" H x 48" W x 19" D Bin Package Options: - 8 1/8" H x 23 5/8" W x 6 5/8" D - qty. 28 (4 bin cups per unit) - 6 1/2" H x 23 6/8" W x 5 1/4" D - qty. 36 (5 bin cups per unit) - 4 1/2" H x 23 5/8" W x 3 5/8" D - qty. 56 (6 bin cups per unit) - 3 1/8" H x 23 5/8" W x 2 1/2" D - qty. 80 (9 bin cups per unit) - 459749164
- Slider Frame with Gondola and Tip Out Bins
|
|
12.5' H x 14' W Carport
From the blazing sun to the harshest storms, your precious automobiles need love too. VersaTube carports are perfect for offering the protection and sturdiness that you would expect with 2" x 3" heavy gauge galvanized steel tubing. In an array of lengths and colors, you are sure to find the perfect size to fit any area requiring shelter from the elements. You can easily assemble your carport/shelter on any level surface by following the instructions and by using the ground anchors provided. Features: - Includes all framing and hardware, plus painted steel roofing, vinyl trim, and butyl caulk tape - Quality low-maintenance finish resists stains, dirt retention, chalking and fading - Incorporates recycled steel (67% of all steel is recycled) - Silicon coating for easy cleaning - Many color and length options - 20-year warranty Specifications: - 29-gauge painted steel panels - 80,000 PSI yield strength minimum - Features a 3:12 roof pitch - Can support 30- 70 psf (pounds per square foot) varies on size and anchor method - Can support winds of 70 - 120 mph varies on size and anchor method - Overall dimensions: 12.5' H x 14' W x 20 - 60.5' D Please note: The color option of white yields a lead time of 3-4 weeks. Universal Carport Installation Instructions Versatube Carports Frequently Asked Questions - Home Family - Furniture - From the blazing sun to the harshest storms, your precious automobiles need love too. VersaTube carports are perfect for offering the protection and sturdiness that you would expect with 2" x 3" heavy gauge galvanized steel tubing. In an array of lengths and colors, you are sure to find the perfect size to fit any area requiring shelter from the elements. You can easily assemble your carport/shelter on any level surface by following the instructions and by using the ground anchors provided. Features: - Includes all framing and hardware, plus painted steel roofing, vinyl trim, and butyl caulk tape - Quality low-maintenance finish resists stains, dirt retention, chalking and fading - Incorporates recycled steel (67% of all steel is recycled) - Silicon coating for easy cleaning - Many color and length options - 20-year warranty Specifications: - 29-gauge painted steel panels - 80,000 PSI yield strength minimum - Features a 3:12 roof pitch - Can support 30- 70 psf (pounds per square foot) varies on size and anchor method - Can support winds of 70 - 120 mph varies on size and anchor method - Overall dimensions: 12.5' H x 14' W x 20 - 60.5' D Please note: The color option of white yields a lead time of 3-4 weeks. Universal Carport Installation Instructions Versatube Carports Frequently Asked Questions - 459749529
- 12.5' H x 14' W Carport - description
|
|
7' H x 20' W Carport
From the blazing sun to the harshest storms, your precious automobiles need love too. VersaTube carports are perfect for offering the protection and sturdiness that you would expect with 2" x 3" heavy gauge galvanized steel tubing. In an array of lengths and colors, you are sure to find the perfect size to fit any area requiring shelter from the elements. You can easily assemble your carport/shelter on any level surface by following the instructions and by using the ground anchors provided. Features: - Includes all framing and hardware, plus painted steel roofing, vinyl trim, and butyl caulk tape - Quality low-maintenance finish resists stains, dirt retention, chalking and fading - Incorporates recycled steel (67% of all steel is recycled) - Silicon coating for easy cleaning - Many color and length options - 20-year warranty Specifications: - 29-gauge painted steel panels - 80,000 PSI yield strength minimum - Features a 3:12 roof pitch - Can support 30- 70 psf (pounds per square foot) varies on size and anchor method - Can support winds of 70 - 120 mph varies on size and anchor method - Overall dimensions: 7' H x 20' W x 20 - 60.5' D Please note: The color option of white yields a lead time of 3-4 weeks. Universal Carport Installation Instructions Versatube Carports Frequently Asked Questions - Home Family - Furniture - From the blazing sun to the harshest storms, your precious automobiles need love too. VersaTube carports are perfect for offering the protection and sturdiness that you would expect with 2" x 3" heavy gauge galvanized steel tubing. In an array of lengths and colors, you are sure to find the perfect size to fit any area requiring shelter from the elements. You can easily assemble your carport/shelter on any level surface by following the instructions and by using the ground anchors provided. Features: - Includes all framing and hardware, plus painted steel roofing, vinyl trim, and butyl caulk tape - Quality low-maintenance finish resists stains, dirt retention, chalking and fading - Incorporates recycled steel (67% of all steel is recycled) - Silicon coating for easy cleaning - Many color and length options - 20-year warranty Specifications: - 29-gauge painted steel panels - 80,000 PSI yield strength minimum - Features a 3:12 roof pitch - Can support 30- 70 psf (pounds per square foot) varies on size and anchor method - Can support winds of 70 - 120 mph varies on size and anchor method - Overall dimensions: 7' H x 20' W x 20 - 60.5' D Please note: The color option of white yields a lead time of 3-4 weeks. Universal Carport Installation Instructions Versatube Carports Frequently Asked Questions - 459749530
- 7' H x 20' W Carport on sale
|
|
4 300 Watt Generator w 8.0 HP Honda GX240 Gas Engine Bonus Package
Check out this amazing deal! By purchasing this rugged, 4,300 watt Milwaukee generator, equipped with a Honda GX240 OHV engine, you will receive a 38-piece Drill Kit, AND a Lithium Ion Compact Drill Driver...absolutely free! This deal won't last forever...but these tools will! Set Includes: -4,300 Watt Generator w/ 8.0 HP Honda GX240 Gas Engine -Lithium Ion Compact Drill Driver - FREE! -38-Piece Quick-Lock Drill Bit Set - FREE! Generator Features: -Honda GX240 (240cc) OHV commercial engine with recoil ignition system -Low oil alert system -"Best In Class" Extra-large metal gas tank (7.5 gal) holds up to 60% more than the competition -Super-quiet, 4-chamber glass-packed mufflers -Automatic Engine Idle Control reduces fuel consumption and noise during no-load periods -Premium alternator with Automatic Voltage Regulation (AVR) -Full-time, Max Power Output (120v and/or 240v) with full generator GFCI protection -Dedicated, branch-rated circuit protection (UL-489 approved) -Seven (7) power receptacles -Heavy-duty, 1-1/4" tubular steel roll-cage frame construction -Stainless steel control panel resists impact damage and elements -one hundred procent sealed control panel switches -UV-resistant rain "curtain" protects receptacles from the elements -Ergonomic design for easy transport -Innovative, quick-release hand-truck design with integrated lift hook -Rugged, 12" all-terrain, non-flat tires with double-ball bearing axle for long life in tough jobsite environments Generator Specifications: -AC Output Max: 4,300 Watt -AC Output Rated: 3,800 Watt -AC Output Surge/Start: 5,700 Watt -Engine Model: Honda OHV GX240 -Engine HP: 8.0 -Starting System: Recoil -Circuit Protection: Branch-Rated (UL 489 Approved) -Fuel Tank Capacity: 7.5 Gallons -Noise Level: 70 dBA -Standard Equipment: Lift-Hook (Folding), Wheel Kit, Engine Oil -Weight: 197 lbs -Warranty (Product/Engine): 2 Year/2 Year GFCI Receptacles (Full GFCI): -20A/120V 3P Outlet (4) -20A/120V Twist-Lock (1) -30A/120V Twist-Lock (1) -20A/120-240V Twist-Lock (1) Lithium Ion Compact Drill Driver Designed with the professional in mind. The Lithium Ion Compact Drill Driver, from Milwaukee tools, is small enough to perform in tight work areas, yet powerful enough to do all the jobs of larger drills. With its dependable, rugged construction, you can get more jobs accomplished in less time, and more efficiently! Driver Features: -25 percent more powerful then the competition with 100 in-lbs -30 percent more run-time then the competition with the ability to drive up to 130 3" screws -Faster than competition with 0-500 rpm -Battery gauge lets you easily see how much battery life is left for your job -Metal gear housing ensures a greater durability and a longer tool life -Built in LED light illuminates work area making it easier to see in dark tight spots -30 Minute Charger keeps you working with little to no down time -Small compact size gives you the freedom to use a power tool not normally accessible to other drills/drivers -New Milwaukee Industrial Design -Soft Grip Sides protects and grips surfaces it is placed upon -Li-ion Manganese Chemistry provides "Fade-Free" power until end of charge -True One Handed Chuck automatically locks onto bit upon insertion Driver Specifications: -Model: Milwaukee 2401-22 Micro Driver Drill -Speed: 500 RPMS -Torque: 1,000 in/lbs -Battery: 1.5 Ah -Two (2) 12V batteries -One (1) 30 min Charger -One (1) Soft Case -Length: 6.5" -Weight: 1.8 lbs 38-Piece Quick-Lock Drill Bit Set Designed for people who need - Home Family - Furniture - Check out this amazing deal! By purchasing this rugged, 4,300 watt Milwaukee generator, equipped with a Honda GX240 OHV engine, you will receive a 38-piece Drill Kit, AND a Lithium Ion Compact Drill Driver...absolutely free! This deal won't last forever...but these tools will! Set Includes: -4,300 Watt Generator w/ 8.0 HP Honda GX240 Gas Engine -Lithium Ion Compact Drill Driver - FREE! -38-Piece Quick-Lock Drill Bit Set - FREE! Generator Features: -Honda GX240 (240cc) OHV commercial engine with recoil ignition system -Low oil alert system -"Best In Class" Extra-large metal gas tank (7.5 gal) holds up to 60% more than the competition -Super-quiet, 4-chamber glass-packed mufflers -Automatic Engine Idle Control reduces fuel consumption and noise during no-load periods -Premium alternator with Automatic Voltage Regulation (AVR) -Full-time, Max Power Output (120v and/or 240v) with full generator GFCI protection -Dedicated, branch-rated circuit protection (UL-489 approved) -Seven (7) power receptacles -Heavy-duty, 1-1/4" tubular steel roll-cage frame construction -Stainless steel control panel resists impact damage and elements -one hundred procent sealed control panel switches -UV-resistant rain "curtain" protects receptacles from the elements -Ergonomic design for easy transport -Innovative, quick-release hand-truck design with integrated lift hook -Rugged, 12" all-terrain, non-flat tires with double-ball bearing axle for long life in tough jobsite environments Generator Specifications: -AC Output Max: 4,300 Watt -AC Output Rated: 3,800 Watt -AC Output Surge/Start: 5,700 Watt -Engine Model: Honda OHV GX240 -Engine HP: 8.0 -Starting System: Recoil -Circuit Protection: Branch-Rated (UL 489 Approved) -Fuel Tank Capacity: 7.5 Gallons -Noise Level: 70 dBA -Standard Equipment: Lift-Hook (Folding), Wheel Kit, Engine Oil -Weight: 197 lbs -Warranty (Product/Engine): 2 Year/2 Year GFCI Receptacles (Full GFCI): -20A/120V 3P Outlet (4) -20A/120V Twist-Lock (1) -30A/120V Twist-Lock (1) -20A/120-240V Twist-Lock (1) Lithium Ion Compact Drill Driver Designed with the professional in mind. The Lithium Ion Compact Drill Driver, from Milwaukee tools, is small enough to perform in tight work areas, yet powerful enough to do all the jobs of larger drills. With its dependable, rugged construction, you can get more jobs accomplished in less time, and more efficiently! Driver Features: -25 percent more powerful then the competition with 100 in-lbs -30 percent more run-time then the competition with the ability to drive up to 130 3" screws -Faster than competition with 0-500 rpm -Battery gauge lets you easily see how much battery life is left for your job -Metal gear housing ensures a greater durability and a longer tool life -Built in LED light illuminates work area making it easier to see in dark tight spots -30 Minute Charger keeps you working with little to no down time -Small compact size gives you the freedom to use a power tool not normally accessible to other drills/drivers -New Milwaukee Industrial Design -Soft Grip Sides protects and grips surfaces it is placed upon -Li-ion Manganese Chemistry provides "Fade-Free" power until end of charge -True One Handed Chuck automatically locks onto bit upon insertion Driver Specifications: -Model: Milwaukee 2401-22 Micro Driver Drill -Speed: 500 RPMS -Torque: 1,000 in/lbs -Battery: 1.5 Ah -Two (2) 12V batteries -One (1) 30 min Charger -One (1) Soft Case -Length: 6.5" -Weight: 1.8 lbs 38-Piece Quick-Lock Drill Bit Set Designed for people who need - 460433271
- 4 300 Watt Generator w 8.0 HP Honda GX240 Gas Engine Bonus Package on sale
|
|
