Electric power pressure washers
|
24 X 48 Two Shelf Wall Storage System
HyLoft's Two-Shelf Wall Storage Systems help you make the most of your wasted wall space. This storage system includes everything you'll need for assembly. These shelves can be installed on finished or unfinished walls. Multiple units can even be connected for an even larger storage area. Maximize your available space today with Hyloft. Features: -Made of strong, durable steel -All hardware for installation included -Install side by side, or stacked -Patented, low profile brackets increase storage area -Attractive, scratch-resistant finishes -Multiple units easily connect to maximize storage -Maximum Load: 150 lbs. -Overall Dimensions: 24" W X 48" D - Home Family - Furniture - HyLoft's Two-Shelf Wall Storage Systems help you make the most of your wasted wall space. This storage system includes everything you'll need for assembly. These shelves can be installed on finished or unfinished walls. Multiple units can even be connected for an even larger storage area. Maximize your available space today with Hyloft. Features: -Made of strong, durable steel -All hardware for installation included -Install side by side, or stacked -Patented, low profile brackets increase storage area -Attractive, scratch-resistant finishes -Multiple units easily connect to maximize storage -Maximum Load: 150 lbs. -Overall Dimensions: 24" W X 48" D - 459749776
- 24 X 48 Two Shelf Wall Storage System
|
|
Open Shelving Storage System with Euro Drawers (75 H x 36 W x 24 D)
Our Open Shelving Systems are sold in packages with Super Tuff Euro bins or can be purchased separately without the bins. This particular package includes a closed shelving unit and 72 Euro Bins of the same size. Features: - Made from high density steel - 400 lb capacity per shelf - "X" Braces on the side for extra support - 13 Shelf Unit - Shelving Unit Dimensions: 75" H x 36" W x 24" D - Bin Dimensions: 4 5/8" H x 5 9/16" W x 23 7/8" D (qty. 72) Note: One bin color per unit only. - Home Family - Furniture - Our Open Shelving Systems are sold in packages with Super Tuff Euro bins or can be purchased separately without the bins. This particular package includes a closed shelving unit and 72 Euro Bins of the same size. Features: - Made from high density steel - 400 lb capacity per shelf - "X" Braces on the side for extra support - 13 Shelf Unit - Shelving Unit Dimensions: 75" H x 36" W x 24" D - Bin Dimensions: 4 5/8" H x 5 9/16" W x 23 7/8" D (qty. 72) Note: One bin color per unit only. - 459749104
- Open Shelving Storage System with Euro Drawers (75 H x 36 W x 24 D)
|
|
Safe Heat Tower Ceramic Heater
Just set your desired comfort level and this intelligent heater will adjust temperature and heat output accordingly. And because the fan speed always stays constant, you can enjoy quiet warmth. With Large LED display so you can read the temperature from far away. Also the motorized oscillation body oscillates from side to side, allowing to warm every corner of the room. Features: -22" high flat tower design with flat front grille and brushed stainless steel knobs -Body oscillates from side to side, allowing you to warm every corner of the room -Electronic controls with large, digital display -8 HR timer automatically turns the unit on and off for custom periods of up to 8 hours -Adjustable thermostat lets you select and maintain a desired level of comfort -Ceramic heating element and extra large grille provides directional flow of heat for better circulation -2 heat flow setting lets you regulate the output of warm air; choose the HIGH setting for 1500 watts or the LOW setting for 825 watts - The fan can be operated without heat for summer ventilation -Remote control -Anti-freeze setting automatically turns the heater ?on" when room temperature drops below 44 degrees Fahrenheit -Safety thermal cut-off turns the unit off when it gets too warm -DESIGNED AND ENGINEERED IN ITALY - Home Family - Kitchen - Just set your desired comfort level and this intelligent heater will adjust temperature and heat output accordingly. And because the fan speed always stays constant, you can enjoy quiet warmth. With Large LED display so you can read the temperature from far away. Also the motorized oscillation body oscillates from side to side, allowing to warm every corner of the room. Features: -22" high flat tower design with flat front grille and brushed stainless steel knobs -Body oscillates from side to side, allowing you to warm every corner of the room -Electronic controls with large, digital display -8 HR timer automatically turns the unit on and off for custom periods of up to 8 hours -Adjustable thermostat lets you select and maintain a desired level of comfort -Ceramic heating element and extra large grille provides directional flow of heat for better circulation -2 heat flow setting lets you regulate the output of warm air; choose the HIGH setting for 1500 watts or the LOW setting for 825 watts - The fan can be operated without heat for summer ventilation -Remote control -Anti-freeze setting automatically turns the heater ?on" when room temperature drops below 44 degrees Fahrenheit -Safety thermal cut-off turns the unit off when it gets too warm -DESIGNED AND ENGINEERED IN ITALY - 459748391
- Safe Heat Tower Ceramic Heater
|
|
75 Double Sided Floor Stand Storage Unit with Tip Out Bins
Floor Stand Units come by themselves or in 9 preconfigured units. In this particular package there is one Double Sided 75" Floor Stand Unit and 14 tip out bin units. Features: - Made from heavy duty 14 gauge steel - Smooth powder coat finish to protect for long term use - Available in 3 different colors - Overall dimensions: 75" H x 23 5/8" W x 16" D Bin Package: - 7 3/4" D x 23 5/8" W x 9 1/2" H - qty 8 (3 bin cups per unit) - 6 5/8" D x 23 5/8" W x 8 1/8" H - qty. 4 (4 bin cups per unit) - 5 1/4" D x 23 5/8" W x 6 1/2" H - qty. 4 (5 bin cups per unit) - 3 5/8" D x 23 5/8" W x 4 1/2" H - qty. 2 (6 bin cups per unit) - Home Family - Furniture - Floor Stand Units come by themselves or in 9 preconfigured units. In this particular package there is one Double Sided 75" Floor Stand Unit and 14 tip out bin units. Features: - Made from heavy duty 14 gauge steel - Smooth powder coat finish to protect for long term use - Available in 3 different colors - Overall dimensions: 75" H x 23 5/8" W x 16" D Bin Package: - 7 3/4" D x 23 5/8" W x 9 1/2" H - qty 8 (3 bin cups per unit) - 6 5/8" D x 23 5/8" W x 8 1/8" H - qty. 4 (4 bin cups per unit) - 5 1/4" D x 23 5/8" W x 6 1/2" H - qty. 4 (5 bin cups per unit) - 3 5/8" D x 23 5/8" W x 4 1/2" H - qty. 2 (6 bin cups per unit) - 459749171
- 75 Double Sided Floor Stand Storage Unit with Tip Out Bins
|
|
Vinyl Milford Shed 10' x 12'
Vinyl Milford Shed 10' x 12' Attractive horizontal siding combines with a vinyl coating to give you a handsome and durable storage solution. A roomy gable roof allows for plenty of headroom and space to work in or hang tools. Features: -Long lasting vinyl-coating provides a five times thicker finish than standard steel buildings -Almond finish with gray bark roof and door jambs -Easy to assemble pre-cut and pre-drilled parts -Galvanized steel construction -Tall door opening and interior height -Mid-wall bracing for greater all-around strength -Solid core-backed doors Dimensions: -Large: 7'H x 10'W x 12'D -Door opening: 5.4'H x 4.5'W Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Foundation Kit 10' x 12' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Roof Strengthening Kit 10' x 12' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - Home Family - Furniture - Vinyl Milford Shed 10' x 12' Attractive horizontal siding combines with a vinyl coating to give you a handsome and durable storage solution. A roomy gable roof allows for plenty of headroom and space to work in or hang tools. Features: -Long lasting vinyl-coating provides a five times thicker finish than standard steel buildings -Almond finish with gray bark roof and door jambs -Easy to assemble pre-cut and pre-drilled parts -Galvanized steel construction -Tall door opening and interior height -Mid-wall bracing for greater all-around strength -Solid core-backed doors Dimensions: -Large: 7'H x 10'W x 12'D -Door opening: 5.4'H x 4.5'W Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Foundation Kit 10' x 12' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Roof Strengthening Kit 10' x 12' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - 459748945
- Vinyl Milford Shed 10' x 12'
|
|
GenShed
The GenShed shelter provides a convenient, rigid, weatherproof, lockable place to store and operate a portable generator for backup power when connected to a transfer switch. It provides out-of-the-way protection for your generator, and frees up space in your garage for other items.Exhaust fumes and heat exit the GenShed shelter through the magnetic exhaust system while additional heat is dissipated through louvers mounted on the walls and rear of the enclosure. The blower fan connects to a standard 120 volt receptacle on the generator to introduce fresh air to the generator engine, and only runs when the generator is running. The high temperature sensor switch will shut off the generator in case of overheating. Features: -Factory Installed Louvers -Patent-Pending Magnetic Exhaust system -Pre-Installed Blower Fan (connects to 120V receptacle on Generator -High Temperature Sensor Switch Please Note: ALL components included in the GenShed shelter kit MUST be installed in order for it to operate as designed and to avoid property damage or personal injury. Not all portable generators are compatible with the GenShed shelter!! Your portable generator MUST have a tubular pipe and/or single exhaust hole and a steel exhaust cavity for the magnet to work. Baffled exhausts or exhaust points with perforated metal holes or louvers will NOT work with the GenShed shelter. Please check the Generator Compatibility Chart for a list of current model generators that have been verified by our factory. The GenShed shelter must be located no less than 18" from a non-combustible surface and no less than 5 feet from a door or window opening. Generator should be placed in the shelter with the exhaust facing the back or side. Magnetic Exhaust System must be affixed to the muffler pipe and the flexible pipe must be routed to the pre-drilled hole that allows the straightest path outside. Installation Manual Compatibility Chart - Home Family - Furniture - The GenShed shelter provides a convenient, rigid, weatherproof, lockable place to store and operate a portable generator for backup power when connected to a transfer switch. It provides out-of-the-way protection for your generator, and frees up space in your garage for other items.Exhaust fumes and heat exit the GenShed shelter through the magnetic exhaust system while additional heat is dissipated through louvers mounted on the walls and rear of the enclosure. The blower fan connects to a standard 120 volt receptacle on the generator to introduce fresh air to the generator engine, and only runs when the generator is running. The high temperature sensor switch will shut off the generator in case of overheating. Features: -Factory Installed Louvers -Patent-Pending Magnetic Exhaust system -Pre-Installed Blower Fan (connects to 120V receptacle on Generator -High Temperature Sensor Switch Please Note: ALL components included in the GenShed shelter kit MUST be installed in order for it to operate as designed and to avoid property damage or personal injury. Not all portable generators are compatible with the GenShed shelter!! Your portable generator MUST have a tubular pipe and/or single exhaust hole and a steel exhaust cavity for the magnet to work. Baffled exhausts or exhaust points with perforated metal holes or louvers will NOT work with the GenShed shelter. Please check the Generator Compatibility Chart for a list of current model generators that have been verified by our factory. The GenShed shelter must be located no less than 18" from a non-combustible surface and no less than 5 feet from a door or window opening. Generator should be placed in the shelter with the exhaust facing the back or side. Magnetic Exhaust System must be affixed to the muffler pipe and the flexible pipe must be routed to the pre-drilled hole that allows the straightest path outside. Installation Manual Compatibility Chart - 459748523
- GenShed - more info
|
|
2.0 GPM 1 400 PSI Mini Power Pack Cold Water Electric Pressure Washer
This medium sized pressure washer is the perfect washer for everyday commercial use. It comes with the Dirt Killer nozzle which doubles the cleaning efficiency. The K 1120T Mini Power Pack Cold Water Electric pressure washer design gives multi-hour bypass and run-dry capability preventing accidental pump damage. There is a built in hose reel that comes with a 50' wire braided hose. The pressure washer has exit side chemical injection and comes with a professional gun-jet lance and safety coupler screw connections. Features: -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage -Dirt Killer nozzle doubles cleaning efficiency -Built-in hose reel -Professional gun-jet lance -50' wire braided hose on hose reel -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet (high-pressure wash/soap) -Dirt Killer turbo nozzle Applications: -Light Commercial Duty: -Hotel and buildings -HVAC maintenance -Screen-printing -Home -Boat or vehicle Specifications: -1,400 PSI -2.0 gallons per minute -Cleaning power: 2,800 -Kranzle AZ industrial grade pump -Kranzle adjustable pressure unloader -110 volt, 15 amps TEFC electric motor with 25' cord -Steel frame with plastic cover that holds all accessories -Inlet water filter -Shipping weight: 70 lbs -Dimensions: 32" H x 13" W x 12" D - Home Family - Furniture - This medium sized pressure washer is the perfect washer for everyday commercial use. It comes with the Dirt Killer nozzle which doubles the cleaning efficiency. The K 1120T Mini Power Pack Cold Water Electric pressure washer design gives multi-hour bypass and run-dry capability preventing accidental pump damage. There is a built in hose reel that comes with a 50' wire braided hose. The pressure washer has exit side chemical injection and comes with a professional gun-jet lance and safety coupler screw connections. Features: -Pump design gives multi-hour bypass and run-dry capability preventing accidental pump damage -Dirt Killer nozzle doubles cleaning efficiency -Built-in hose reel -Professional gun-jet lance -50' wire braided hose on hose reel -Exit side chemical injection -Gauge -Safety coupler screw connections -Knife-jet (high-pressure wash/soap) -Dirt Killer turbo nozzle Applications: -Light Commercial Duty: -Hotel and buildings -HVAC maintenance -Screen-printing -Home -Boat or vehicle Specifications: -1,400 PSI -2.0 gallons per minute -Cleaning power: 2,800 -Kranzle AZ industrial grade pump -Kranzle adjustable pressure unloader -110 volt, 15 amps TEFC electric motor with 25' cord -Steel frame with plastic cover that holds all accessories -Inlet water filter -Shipping weight: 70 lbs -Dimensions: 32" H x 13" W x 12" D - 459748528
- 2.0 GPM 1 400 PSI Mini Power Pack Cold Water Electric Pressure Washer - description
|
Gift Certificates Online Gift Certificate pages Calendar planner briefcases Calendar planner briefcases and other items on sale
|
Pressure Washer 3.5 3000 PSI Rotating Nozzle Accessory
An important accessory to have on your shelf, this Mi-T-M rotating nozzle is perfect for quick and efficient washing. Rotating nozzle 3.5" orifice, offers 0 degree spray impact with 25 degree coverage. This nozzle features heavy duty components ensuring long life and reliability. A compact piece with 3.5" orifice size, it will fit perfectly in your job kit. Features: -Brass rotating nozzle -3000 PSI -3.5" Orifice -Weight: 5 lbs - Home Family - Furniture - An important accessory to have on your shelf, this Mi-T-M rotating nozzle is perfect for quick and efficient washing. Rotating nozzle 3.5" orifice, offers 0 degree spray impact with 25 degree coverage. This nozzle features heavy duty components ensuring long life and reliability. A compact piece with 3.5" orifice size, it will fit perfectly in your job kit. Features: -Brass rotating nozzle -3000 PSI -3.5" Orifice -Weight: 5 lbs - 459748841
- Pressure Washer 3.5 3000 PSI Rotating Nozzle Accessory - for sale
|
|
Pressure Washer 4.0 3000 PSI Rotating Nozzle Accessory
An important accessory to have on your shelf, this rotating nozzle is perfect for quick and efficient washing. The rotating 4.0" orifice nozzle offers 0 degree spray impact with 25 degree coverage. This nozzle features heavy duty components ensuring long life and reliability. This compact piece will fit perfectly in your job kit. Features: -Brass rotating nozzle -3000 PSI -4.0" Orifice -Weight: 5 lbs - Home Family - Furniture - An important accessory to have on your shelf, this rotating nozzle is perfect for quick and efficient washing. The rotating 4.0" orifice nozzle offers 0 degree spray impact with 25 degree coverage. This nozzle features heavy duty components ensuring long life and reliability. This compact piece will fit perfectly in your job kit. Features: -Brass rotating nozzle -3000 PSI -4.0" Orifice -Weight: 5 lbs - 459748842
- Pressure Washer 4.0 3000 PSI Rotating Nozzle Accessory - on sale
|
|
Pressure Washer Extension Hose Accessory
In order to make the most out of your Mi-T-M pressure washer proper accessories are necessary. This Mi-T-M pressure washer extension hose is a perfect attachment for all Mi-T-M pressure washer models. The high pressure hose includes quick connects, swivel and bend restrictors. Light and durable, it is just what you need to increase the usability of your pressure washer. Features: -Fits all Mi-T-M models -3000 PSI max -Wire braid -Non marking -Chemical resistant -50' x 3/8" - Home Family - Furniture - In order to make the most out of your Mi-T-M pressure washer proper accessories are necessary. This Mi-T-M pressure washer extension hose is a perfect attachment for all Mi-T-M pressure washer models. The high pressure hose includes quick connects, swivel and bend restrictors. Light and durable, it is just what you need to increase the usability of your pressure washer. Features: -Fits all Mi-T-M models -3000 PSI max -Wire braid -Non marking -Chemical resistant -50' x 3/8" - 459748847
- Pressure Washer Extension Hose Accessory - more info
|
|
Pressure Washer 3.0 3000 PSI Rotating Nozzle Accessory
An important accessory to have on your shelf, this Mi-T-M rotating nozzle is perfect for quick and efficient washing. The nozzle increases cleaning power and efficiency. The brass orifice offers 0 degree spray impact with 25 degree coverage. A compact piece with 3" orifice size, it will fit perfectly in your job kit. Features: -Brass rot1ating nozzle -3000 Maximum PSI -3" Orifice -Weight: 5 lbs - Home Family - Furniture - An important accessory to have on your shelf, this Mi-T-M rotating nozzle is perfect for quick and efficient washing. The nozzle increases cleaning power and efficiency. The brass orifice offers 0 degree spray impact with 25 degree coverage. A compact piece with 3" orifice size, it will fit perfectly in your job kit. Features: -Brass rot1ating nozzle -3000 Maximum PSI -3" Orifice -Weight: 5 lbs - 461656832
- Pressure Washer 3.0 3000 PSI Rotating Nozzle Accessory - more info
|
|
5 Modular Endcaps
Optimize your storage space with StoreWALL garage products. Effective use of shelves means you are more organized, and you can actually find your tools when you need them. The Modular Endcaps are an option which makes the shelf a tray and provides a finished end. Left and right hand caps sold as pairs. Features: -Designed to be compatible with StoreWALL's 5" CustomCut Shelf, our sku# stw1035 - Home Family - Furniture - Optimize your storage space with StoreWALL garage products. Effective use of shelves means you are more organized, and you can actually find your tools when you need them. The Modular Endcaps are an option which makes the shelf a tray and provides a finished end. Left and right hand caps sold as pairs. Features: -Designed to be compatible with StoreWALL's 5" CustomCut Shelf, our sku# stw1035 - 459749460
- 5 Modular Endcaps on sale
|
|
Copyright 2008 hr11web.com - All rights reserved.
|
