Electric power pressure washers
|
2700 PSI Cold Water Gas Pressure Washer with 6 HP Honda GC Engine
Ideal for home use, this cart-mounted pressure washer is great for cleaning large surfaces like driveways and home siding. It features a 3 gallon chemical tank and a two piece wand that provides an easy way for you to inject chemicals that you would need to clean tough surfaces. This pressure washer also comes with a trigger gun and a 50 foot non-marking pressure hose, making it the complete package for all your cleaning needs. Features: -Triplex plunger pump with ceramic plungers and stainless steel valves -Adjustable pressure -Powder-coated steel frame with wand / hose rack -Mechanical thermal relief valve -Trigger gun with 36" wand -Two piece wand with multi-reg zero to sixty degree pattern tip with Hi-Low for chemical injections -10" Pneumatic tires with tube -Non-marking hose Specifications: -Maximum PSI: 2700 PSI -Adjustable pressure: 183.3 PSI - 2700 PSI -Engine: 6 HP Honda GC -Engine tank capacity: 1.9 quarts -Maximum pump temperature: 140 degrees fahrenheit -Water flow: 2.3 GPM / 8.75 Ipm -Water temperature: cold water -Chemical injection: yes -Chemical tank: 3 gallon -Hose: 50 feet -Nozzle: multi-reg zero to sixty degree pattern tip -Dimensions: 36" H X 21.5" W X 30" D - Home Family - Furniture - Ideal for home use, this cart-mounted pressure washer is great for cleaning large surfaces like driveways and home siding. It features a 3 gallon chemical tank and a two piece wand that provides an easy way for you to inject chemicals that you would need to clean tough surfaces. This pressure washer also comes with a trigger gun and a 50 foot non-marking pressure hose, making it the complete package for all your cleaning needs. Features: -Triplex plunger pump with ceramic plungers and stainless steel valves -Adjustable pressure -Powder-coated steel frame with wand / hose rack -Mechanical thermal relief valve -Trigger gun with 36" wand -Two piece wand with multi-reg zero to sixty degree pattern tip with Hi-Low for chemical injections -10" Pneumatic tires with tube -Non-marking hose Specifications: -Maximum PSI: 2700 PSI -Adjustable pressure: 183.3 PSI - 2700 PSI -Engine: 6 HP Honda GC -Engine tank capacity: 1.9 quarts -Maximum pump temperature: 140 degrees fahrenheit -Water flow: 2.3 GPM / 8.75 Ipm -Water temperature: cold water -Chemical injection: yes -Chemical tank: 3 gallon -Hose: 50 feet -Nozzle: multi-reg zero to sixty degree pattern tip -Dimensions: 36" H X 21.5" W X 30" D - 459748179
- 2700 PSI Cold Water Gas Pressure Washer with 6 HP Honda GC Engine
|
|
33 000 BTU Natural Gas Spot Heater
These heaters are different from other heaters on the market in one very fundamental way: The IRLens. The IRLens is an exclusive, unique and patented lens that is fitted on VersaHeat heaters. The revolutionary design of the IRLens captures the majority of the infrared wasted by all other heaters on the market and focuses it on a targeted area of zone, spot heating it. As a result, the VersaHeat can increase delivered heat by 300 percent, attain a 20 degree increase in zone temperature and reduce total heating costs by 50 percent or more. Features: - Natural Gas - Compact and lightweight - Full heat in three minutes - Increased reliability with no moving parts - Wind does not affect radiant heat - Outside of heater is cool Specifications - BTU: 33,000 Warranty: - One year warranty - Home Family - Furniture - These heaters are different from other heaters on the market in one very fundamental way: The IRLens. The IRLens is an exclusive, unique and patented lens that is fitted on VersaHeat heaters. The revolutionary design of the IRLens captures the majority of the infrared wasted by all other heaters on the market and focuses it on a targeted area of zone, spot heating it. As a result, the VersaHeat can increase delivered heat by 300 percent, attain a 20 degree increase in zone temperature and reduce total heating costs by 50 percent or more. Features: - Natural Gas - Compact and lightweight - Full heat in three minutes - Increased reliability with no moving parts - Wind does not affect radiant heat - Outside of heater is cool Specifications - BTU: 33,000 Warranty: - One year warranty - 459749612
- 33 000 BTU Natural Gas Spot Heater
|
|
50' Hose Kit
Designed with high quality parts, this hose kit helps to extend the length of your pressure hose so you can easily move around without bringing the whole washer with you. It comes with twist fast adapters to hook directly to the hose that comes with your pressure washer. This pressure 50 foot hose kit also can be used on any pressure washer up to 3000 PSI. Features: -50 foot hose allows for easy mobility -Comes with twist fast adapters -Can be used on any Cam Spray pressure washer up to 3000 PSI - Home Family - Furniture - Designed with high quality parts, this hose kit helps to extend the length of your pressure hose so you can easily move around without bringing the whole washer with you. It comes with twist fast adapters to hook directly to the hose that comes with your pressure washer. This pressure 50 foot hose kit also can be used on any pressure washer up to 3000 PSI. Features: -50 foot hose allows for easy mobility -Comes with twist fast adapters -Can be used on any Cam Spray pressure washer up to 3000 PSI - 459846499
- 50' Hose Kit
|
|
Stearns StormPro Boat Cover
Protect your boat while in storage or tow with the Stearns StormPro Boat Cover from Classic Accessories. The high strength StormPro polyester marine canvas resists mildew and UV damage and has been engineered for durability and weather resistance. Whether off to the lake for the weekend or on a fishing trip, the StormPro Boat Cover is a necessity for your Boat towing adventure. Features: -Rugged Grey StormPro deluxe marine canvas won't stretch or shrink and is stronger than the cotton canvas used in most boat covers -Treated for maximum water resistance and water repellency -Resistant to mildew and UV damage -Integrated buckle and strap system for easy fitting and trailering -Adjustable straps snap into quick - release buckles on the covers -Storage bag and all trailering straps included -Sizing fits today's wider boats -Adjustable elastic cord sewn into entire bottom hem gives us a tight and custom fit -Included support pole prevents water from pooling and preserves your cover -Five year warranty Specifications: -Model A: Fits 14 to 16 foot V - Hull Fishing Boats with a beam width to 75" -Model B: Fits 14 to 16 foot (beam width to 98") V - Hull Runabouts (outboards and I/O) and Aluminum Bass Boats -Model C: Fits 16 to 18.5 foot (beam width to 98") Fish / Ski Boats and Pro - Style Bass Boats -Model D: Fits 17 to 19 foot V - Hull Runabouts (outboards and I/O) with a beam width of 102" -Model E: Fits 20 to 22 foot V - Hull Runabouts (outboards and I/O) with a beam width of 106" -Model F: Fits 22 to 24 foot V - Hull Runabouts (outboards and I/O) with a beam width of 116" - Home Family - Furniture - Protect your boat while in storage or tow with the Stearns StormPro Boat Cover from Classic Accessories. The high strength StormPro polyester marine canvas resists mildew and UV damage and has been engineered for durability and weather resistance. Whether off to the lake for the weekend or on a fishing trip, the StormPro Boat Cover is a necessity for your Boat towing adventure. Features: -Rugged Grey StormPro deluxe marine canvas won't stretch or shrink and is stronger than the cotton canvas used in most boat covers -Treated for maximum water resistance and water repellency -Resistant to mildew and UV damage -Integrated buckle and strap system for easy fitting and trailering -Adjustable straps snap into quick - release buckles on the covers -Storage bag and all trailering straps included -Sizing fits today's wider boats -Adjustable elastic cord sewn into entire bottom hem gives us a tight and custom fit -Included support pole prevents water from pooling and preserves your cover -Five year warranty Specifications: -Model A: Fits 14 to 16 foot V - Hull Fishing Boats with a beam width to 75" -Model B: Fits 14 to 16 foot (beam width to 98") V - Hull Runabouts (outboards and I/O) and Aluminum Bass Boats -Model C: Fits 16 to 18.5 foot (beam width to 98") Fish / Ski Boats and Pro - Style Bass Boats -Model D: Fits 17 to 19 foot V - Hull Runabouts (outboards and I/O) with a beam width of 102" -Model E: Fits 20 to 22 foot V - Hull Runabouts (outboards and I/O) with a beam width of 106" -Model F: Fits 22 to 24 foot V - Hull Runabouts (outboards and I/O) with a beam width of 116" - 460063652
- Stearns StormPro Boat Cover
|
|
Stearns Orion? Deluxe Boat Cover with Optional Support Pole and Marine Safety Kit
Stearns Orion? Deluxe Boat Cover Protect your boat while in storage or tow with the Stearns Orion Deluxe Boat Cover from Classic Accessories. The rugged Orion Deluxe canvas fabric resists mildew and UV damage and won't stretch or shrink because it is much stronger than ordinary canvas. Whether off to the lake for the weekend or on a fishing trip, the Orion Deluxe Boat Cover is a necessity for your Boat towing adventure. Features: -Blue and Grey Orion deluxe marine canvas -Fabric coating technology assures maximum water resistance and water repellency -Quick - release buckle and strap system for easy fitting and trailering -Storage bag and all trailering straps included -Tension panel system holds cover tight and distributes stress from high winds and highway speeds -Special pocket to store strap and prevent damage -Rear cinch cam buckles let you cinch the bottom hem tightly to your boat -Full cut allows extra room for accessories such as bow rails, running lights, etc. -Dual rear air vents reduce inside moisture and ballooning of cover at high speeds Specifications: -Model AA: Fits 12 to 14 foot V - Hull Fishing Boats with a beam width to 68" -Model A: Fits 14 to 16 foot V - Hull Fishing Boats with a beam width to 75" -Model B: Fits 14 to 16 foot (beam width to 90") V - Hull Runabouts (outboards and I/O), Tri - Hull Runabouts (outboards and I/O) and Aluminum Bass Boats -Model C: Fits 16 to 18.5 foot (beam width to 98") Fish / Ski Boats and Pro - Style Bass Boats -Model D: Fits 17 to 19 foot V - Hull Runabouts (outboards and I/O) with a beam width to 102" -Model E: Fits 20 to 22 foot V - Hull Runabouts (outboards and I/O) with a beam width to 106" Stearns Boat Cover Support Pole The Boat Cover Support Pole from Classic Accessories was designed to maximize the life of your Boat Cover by preventing the pooling of water. This durable Support Pole is constructed from rustproof ABS and easily adjusts from 12" to 54" in seconds! This Support Pole may be placed to support any area of a boat cover providing versatility and effortless convenience. Features: -Constructed from rustproof ABS with black finish -Top accepts additional support straps (not included) -Supports any area of a boat cover -Height adjusts from 12" to 54" Stearns Marine Safety Kit Be sure to stow this Marine Safety Kit on your next marine adventure. You won't want to be stuck without these true Marine Safety necessities. Contained in a waterproof container with a screw - top lid and easy - open grip, this Marine Safety Kit is protected, so it's safe until you need it. Features: -15 m buoyant heaving line with float -Whistle signaling device with lanyard -Watertight flashlight (batteries not included) -Waterproof container in safety orange for visibility with attachment lanyard so it can double as a bailing bucket - Home Family - Furniture - Stearns Orion? Deluxe Boat Cover Protect your boat while in storage or tow with the Stearns Orion Deluxe Boat Cover from Classic Accessories. The rugged Orion Deluxe canvas fabric resists mildew and UV damage and won't stretch or shrink because it is much stronger than ordinary canvas. Whether off to the lake for the weekend or on a fishing trip, the Orion Deluxe Boat Cover is a necessity for your Boat towing adventure. Features: -Blue and Grey Orion deluxe marine canvas -Fabric coating technology assures maximum water resistance and water repellency -Quick - release buckle and strap system for easy fitting and trailering -Storage bag and all trailering straps included -Tension panel system holds cover tight and distributes stress from high winds and highway speeds -Special pocket to store strap and prevent damage -Rear cinch cam buckles let you cinch the bottom hem tightly to your boat -Full cut allows extra room for accessories such as bow rails, running lights, etc. -Dual rear air vents reduce inside moisture and ballooning of cover at high speeds Specifications: -Model AA: Fits 12 to 14 foot V - Hull Fishing Boats with a beam width to 68" -Model A: Fits 14 to 16 foot V - Hull Fishing Boats with a beam width to 75" -Model B: Fits 14 to 16 foot (beam width to 90") V - Hull Runabouts (outboards and I/O), Tri - Hull Runabouts (outboards and I/O) and Aluminum Bass Boats -Model C: Fits 16 to 18.5 foot (beam width to 98") Fish / Ski Boats and Pro - Style Bass Boats -Model D: Fits 17 to 19 foot V - Hull Runabouts (outboards and I/O) with a beam width to 102" -Model E: Fits 20 to 22 foot V - Hull Runabouts (outboards and I/O) with a beam width to 106" Stearns Boat Cover Support Pole The Boat Cover Support Pole from Classic Accessories was designed to maximize the life of your Boat Cover by preventing the pooling of water. This durable Support Pole is constructed from rustproof ABS and easily adjusts from 12" to 54" in seconds! This Support Pole may be placed to support any area of a boat cover providing versatility and effortless convenience. Features: -Constructed from rustproof ABS with black finish -Top accepts additional support straps (not included) -Supports any area of a boat cover -Height adjusts from 12" to 54" Stearns Marine Safety Kit Be sure to stow this Marine Safety Kit on your next marine adventure. You won't want to be stuck without these true Marine Safety necessities. Contained in a waterproof container with a screw - top lid and easy - open grip, this Marine Safety Kit is protected, so it's safe until you need it. Features: -15 m buoyant heaving line with float -Whistle signaling device with lanyard -Watertight flashlight (batteries not included) -Waterproof container in safety orange for visibility with attachment lanyard so it can double as a bailing bucket - 460063718
- Stearns Orion? Deluxe Boat Cover with Optional Support Pole and Marine Safety Kit
|
|
JUMBO Ultra Series Divider for QUS955
These dividers help increase your Ultra Bin storage options by creating multiple compartments within one unit. - Home Family - Furniture - These dividers help increase your Ultra Bin storage options by creating multiple compartments within one unit. - 459749254
- JUMBO Ultra Series Divider for QUS955 on sale
|
|
Conductive Dividable Grid Storage Container Short Dividers for DG93120CO
Dividable Grid Container Short Dividers come in 9 different dimensions to fit any Dividable Grid Container. Use with Model DG93120CO. - Home Family - Furniture - Dividable Grid Container Short Dividers come in 9 different dimensions to fit any Dividable Grid Container. Use with Model DG93120CO. - 459749312
- Conductive Dividable Grid Storage Container Short Dividers for DG93120CO - on sale
|
Office Furniture Stores Office Furniture products site Medical supplies and health care products Medical supplies, health care products and other items
|
Q Series 4000 PSI Hot Water Gas Pressure Washer
Equipped with a 16 HP Briggs Vanguard engine, this gas-powered pressure washer is ideal for frequent to daily use on large cleaning projects. It features a schedule 80 coil with stainless steel cool wrap and a mechanical thermal relief valve which provides you safety to run the washer without it overheating. This model also has a powder-coated frame with wand / hose rack that prevents it from rusting, which increases the overall life of this washer. Features: -Fully portable, no electricity required -Equipped with 12 volt fired burner -Triplex plunger pump with ceramic plungers, stainless steel valves -Mechanical thermal relief valve -Adjustable pressure -Adjustable thermostat and pressure pop-off -Schedule 80 coil with stainless steel cool wrap -Powder-coated frame with wand / hose rack -13" Pneumatic tires with tube -Trigger gun -Pressure hose -Dual wand with side handle and detergent tip -Interchangeable tips -Oil fired burner uses diesel fuel or kerosene to achieve a 140 degree rise temperature -8 Gallon rust free poly burner fuel tank -Battery not included Specifications: -Maximum PSI: 4000 PSI -Adjustable pressure: 276 PSI - 4000 PSI -Engine: 16 HP Briggs Vanguard E/S -Fuel tank capacity: 9 quart -Burner fuel capacity: 8 gallon -Water flow: 4.0 GPM / 15.2 Ipm -Water temperature: hot water -Chemical injection: yes -Hose: 50 feet -Nozzle: quick change tips in 0, 15, 25 and 40 degrees -Dimensions: 49" H X 32" W X 54" D - Home Family - Furniture - Equipped with a 16 HP Briggs Vanguard engine, this gas-powered pressure washer is ideal for frequent to daily use on large cleaning projects. It features a schedule 80 coil with stainless steel cool wrap and a mechanical thermal relief valve which provides you safety to run the washer without it overheating. This model also has a powder-coated frame with wand / hose rack that prevents it from rusting, which increases the overall life of this washer. Features: -Fully portable, no electricity required -Equipped with 12 volt fired burner -Triplex plunger pump with ceramic plungers, stainless steel valves -Mechanical thermal relief valve -Adjustable pressure -Adjustable thermostat and pressure pop-off -Schedule 80 coil with stainless steel cool wrap -Powder-coated frame with wand / hose rack -13" Pneumatic tires with tube -Trigger gun -Pressure hose -Dual wand with side handle and detergent tip -Interchangeable tips -Oil fired burner uses diesel fuel or kerosene to achieve a 140 degree rise temperature -8 Gallon rust free poly burner fuel tank -Battery not included Specifications: -Maximum PSI: 4000 PSI -Adjustable pressure: 276 PSI - 4000 PSI -Engine: 16 HP Briggs Vanguard E/S -Fuel tank capacity: 9 quart -Burner fuel capacity: 8 gallon -Water flow: 4.0 GPM / 15.2 Ipm -Water temperature: hot water -Chemical injection: yes -Hose: 50 feet -Nozzle: quick change tips in 0, 15, 25 and 40 degrees -Dimensions: 49" H X 32" W X 54" D - 459748125
- Q Series 4000 PSI Hot Water Gas Pressure Washer in shop
|
|
Woodview Shed 10' x 8'
Get the realistic look of wood-grain, maintenance free. The Woodview's tall roof gives you easy access to all stored items from lawn mowers, patio furniture to grills and much more! Features: -Woodgrain finish with coffee roof and trim -Easy to assemble pre-cut and pre-drilled parts -Attractive, horizontal steel panels that "drop in place" for faster assembly -Tall high-gambrel roof means extra headroom and easy access -Mid-wall bracing for greater all-around strength -Deep track door glides for smooth sliding dependability Dimensions: -Small: 7'H x 10'W x 8'D -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - Home Family - Furniture - Get the realistic look of wood-grain, maintenance free. The Woodview's tall roof gives you easy access to all stored items from lawn mowers, patio furniture to grills and much more! Features: -Woodgrain finish with coffee roof and trim -Easy to assemble pre-cut and pre-drilled parts -Attractive, horizontal steel panels that "drop in place" for faster assembly -Tall high-gambrel roof means extra headroom and easy access -Mid-wall bracing for greater all-around strength -Deep track door glides for smooth sliding dependability Dimensions: -Small: 7'H x 10'W x 8'D -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - 459748910
- Woodview Shed 10' x 8' in shop
|
|
Concord Shed 10' x 8'
Concord Shed 10' x 8' Open the doors of the Concord and discover the large capacity of this handsome storage building. Designed with your specific storage needs in mind, the Concord is the do-it-yourself answer to organizing lawn and garden tools, pool equipment, bicycles and many seasonal items. Get extra storage room in your own backyard. Features: -Durable baked on polyester enamel finish -Eggshell finish with coffee door jambs -Easy to assemble pre-cut and pre-drilled parts -High barn-shaped roof for extra storage and headroom -Galvanized steel construction -Mid-wall bracing for greater all-around strength -Double braced doors for extra strength -Deep track doors and large door glides for a smooth fit Dimensions: -Small: 7.25'H x 10'W x 8'D -Door opening: 5'H x 4.6'W Foundation Kit 10' x 8' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Roof Strengthening Kit 10' x 8' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - Home Family - Furniture - Concord Shed 10' x 8' Open the doors of the Concord and discover the large capacity of this handsome storage building. Designed with your specific storage needs in mind, the Concord is the do-it-yourself answer to organizing lawn and garden tools, pool equipment, bicycles and many seasonal items. Get extra storage room in your own backyard. Features: -Durable baked on polyester enamel finish -Eggshell finish with coffee door jambs -Easy to assemble pre-cut and pre-drilled parts -High barn-shaped roof for extra storage and headroom -Galvanized steel construction -Mid-wall bracing for greater all-around strength -Double braced doors for extra strength -Deep track doors and large door glides for a smooth fit Dimensions: -Small: 7.25'H x 10'W x 8'D -Door opening: 5'H x 4.6'W Foundation Kit 10' x 8' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Roof Strengthening Kit 10' x 8' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - 459748923
- Concord Shed 10' x 8' - more info
|
|
Lexington Shed 10' x 8'
Lexington Shed 10' x 8' Looking for a place to store all your stuff? Arrow's high-gambrel style Lexington storage building gives you 487 cubic feet of storage (852 with the 10x14 model). Give your garage back to your car and organize lawn and garden equipment, patio furniture and much more in the durable Lexington Shed. Features: -Durable baked on polyester enamel finish -Eggshell finish with taupe roof and door jambs -Easy to assemble pre-cut and pre-drilled parts -High barn-shaped roof for extra storage and headroom -Galvanized steel construction -Mid-wall bracing for greater all-around strength -Double braced doors for extra strength -Deep track doors and large door glides for a smooth fit Dimensions: -Small: 7.25'H x 10'W x 8'D -Door opening: 5'H x 4.6'W Foundation Kit 10' x 8' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Roof Strengthening Kit 10' x 8' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - Home Family - Furniture - Lexington Shed 10' x 8' Looking for a place to store all your stuff? Arrow's high-gambrel style Lexington storage building gives you 487 cubic feet of storage (852 with the 10x14 model). Give your garage back to your car and organize lawn and garden equipment, patio furniture and much more in the durable Lexington Shed. Features: -Durable baked on polyester enamel finish -Eggshell finish with taupe roof and door jambs -Easy to assemble pre-cut and pre-drilled parts -High barn-shaped roof for extra storage and headroom -Galvanized steel construction -Mid-wall bracing for greater all-around strength -Double braced doors for extra strength -Deep track doors and large door glides for a smooth fit Dimensions: -Small: 7.25'H x 10'W x 8'D -Door opening: 5'H x 4.6'W Foundation Kit 10' x 8' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Roof Strengthening Kit 10' x 8' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware included - 459748927
- Lexington Shed 10' x 8'
|
|
Yorktown Shed 10' x8'
Yorktown Shed 10' x8' Engineered for durability and storage convenience, the Red Barn's 8 foot interior height makes it ideal for storing tall items. There's more space to walk and work in! Horizontal wall panels "drop into place" for easier assembly and all parts are numbered, pre-cut and pre-drilled. Features: -Durable baked on polyester enamel finish -Eggshell finish with taupe roof and coffee door jambs -Easy to assemble pre-cut and pre-drilled parts -High barn-shaped roof for extra storage and headroom -Galvanized steel construction -7 foot interior height for tall items -Mid-wall bracing for greater all-around strength -Double-braced sliding doors for extra strength -Deep track doors and large door glides for a smooth fit Dimensions: -Small: 7.2'H x 10'W x 8'D -Door opening: 5'H x 4.6'W Foundation Kit 10' x 8' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Roof Strengthening Kit 10' x 8' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware inc - Home Family - Furniture - Yorktown Shed 10' x8' Engineered for durability and storage convenience, the Red Barn's 8 foot interior height makes it ideal for storing tall items. There's more space to walk and work in! Horizontal wall panels "drop into place" for easier assembly and all parts are numbered, pre-cut and pre-drilled. Features: -Durable baked on polyester enamel finish -Eggshell finish with taupe roof and coffee door jambs -Easy to assemble pre-cut and pre-drilled parts -High barn-shaped roof for extra storage and headroom -Galvanized steel construction -7 foot interior height for tall items -Mid-wall bracing for greater all-around strength -Double-braced sliding doors for extra strength -Deep track doors and large door glides for a smooth fit Dimensions: -Small: 7.2'H x 10'W x 8'D -Door opening: 5'H x 4.6'W Foundation Kit 10' x 8' -Please specify size -Assembles in minutes -Keeps stored items off the ground -Strong hot-dipped galvanized steel -Perfect for plywood floor finish -Finishing material not included Anchor Kit- Auger -Easy to install -Auger Kit: Includes four 30" heavy duty steel augers, 60' of aircraft strength cable, and 4 cable clamps -Force of 1500 lbs. required to remove anchors from ground Anchor Kit - Concrete -Easy to install -Concrete Kit: Includes four steel corner gussets and perimeter clips -Lag bolts building directly into concrete slab -1/4 inch masonry drill bit included Roof Strengthening Kit 10' x 8' If you live in an area with a lot of snow accumulation, you may wish to reinforce your shed roof. This easy do-it-yourself kit is the perfect way to strengthen your shed! Features: -Increase roof strength by 50% for heavy snow accumulation -Easy to install -Fits most new or existing Arrow buildings -Please specify size Corkscrew Ground Anchor Kit -Great for anchoring small and slope roof buildings -Includes 4 corkscrew type anchors, 4 corner gussets and 4 locking washers. -Fits steel buildings up to 10x13 ft. -Ground Anchors or Concrete Anchors are also recommended Shed Rack - For placement in sheds, garages, basements and any workshop -Get 15 1/2 extra square ft. of storage space -Each shelf holds up to 200 lbs. (even weight distribution) -Color: Black -No. of Shelves: 4 -Sturdy steel -Overall Dimensions: 58" H x 36" W x 16" D Shelving System -Each kit contains 4 shelf brackets (8 1/2" L), 2 pair of telescoping wall braces, complete hardware, and instructions -Made of heavy duty galvanized steel for durability -Makes it easy to build 8" or 12" wide shelves in any length -Perfect for all Arrow buildings, garages, basements or workshops -Shelving material not included Attic Storage Kit -Get an extra 25 sq. ft. of storage space - Adjustable to any of 5 heights for an attic or workbench -Fits any 10 foot wide Arrow Building -Holds up to 250 lbs (even weight distribution) Tool Hanging Rack -Twin 25 1/5" channels that can be mounted easily on any storage building wall -Five separate large tool holders snap into the channel anywhere along its length to hold long handled tools of any width -A small tool holder is designed to snap in place to hold a complete set of screwdrivers, pliers and other hand tools Door Tune-Up Kit -2 Door Handles -4 Door Slides -4 Lower Door Guides -4 #10B x 1/2" Screws -8 #8-32 3/8" Machine Screws -8 #8-32 Hex Nuts -Includes handles, slides and guides for all Arrow sliding door buildings -All hardware inc - 459748938
- Yorktown Shed 10' x8' - more info
|
|
Copyright 2008 hr11web.com - All rights reserved.
|
