Mounts and more
|
Middle Atlantic Wall Mount Shelf
Wall mounting non-rackmount component is much easier with our WMS wall mount shelf. Can be used to economically wall-mount our RK series racks. Features: -Fully welded design using 16-gauge steel -200 lb. capacity -Vented bottom -Both 1/2" and 3/4" electrical knockouts - Home Family - Furniture - Wall mounting non-rackmount component is much easier with our WMS wall mount shelf. Can be used to economically wall-mount our RK series racks. Features: -Fully welded design using 16-gauge steel -200 lb. capacity -Vented bottom -Both 1/2" and 3/4" electrical knockouts - 459776897
- Middle Atlantic Wall Mount Shelf
|
|
Middle Atlantic Cantilever Support Base for RL Series Relay Racks
Features: -Adds stability to any RL Series relay rack -Helpful for installations where flush mounted cantilever shelves are used to mount heavy equipment and the center-of-gravity is shifted to the rear of the rack -Black powder coat finish -18'' deep - Home Family - Furniture - Features: -Adds stability to any RL Series relay rack -Helpful for installations where flush mounted cantilever shelves are used to mount heavy equipment and the center-of-gravity is shifted to the rear of the rack -Black powder coat finish -18'' deep - 459776691
- Middle Atlantic Cantilever Support Base for RL Series Relay Racks
|
|
Draper Replacement 2 - Station Control
The MS-3R and MS-4R are 3 and 4-wire version of the same switch, used for controlling one screen from multiple locations, using the motor's voltage. MS-4R is the first control station in a serie of stations. It is also the intermediate contorl in the case of three or more stations. The fourth wire is taped off to create the MS-3R. MS-3R is the last control station in a series of stations. therefore, it does not need to pass electricity to a next switch. It is used with one or more MS-4R controls. Features: -Switch is a black, Euro-style (rounded and oval)rocker switch. -Cover plate is aluminum, finished silver satin -Four 6" wire leads: black, red, blue, and black -MS-3R and MS-4R start out as the same control. the 3 and 4 indicate the number of wires connected to the switch. -2 3/4"W x 4 1/2" H cover plate fits a single - gang box. - Home Family - Furniture - The MS-3R and MS-4R are 3 and 4-wire version of the same switch, used for controlling one screen from multiple locations, using the motor's voltage. MS-4R is the first control station in a serie of stations. It is also the intermediate contorl in the case of three or more stations. The fourth wire is taped off to create the MS-3R. MS-3R is the last control station in a series of stations. therefore, it does not need to pass electricity to a next switch. It is used with one or more MS-4R controls. Features: -Switch is a black, Euro-style (rounded and oval)rocker switch. -Cover plate is aluminum, finished silver satin -Four 6" wire leads: black, red, blue, and black -MS-3R and MS-4R start out as the same control. the 3 and 4 indicate the number of wires connected to the switch. -2 3/4"W x 4 1/2" H cover plate fits a single - gang box. - 459777481
- Draper Replacement 2 - Station Control
|
|
Draper Matte White: Targa Electric Screen With Low Voltage Controller - WideScreen 99 inch diagonal
This contemporary motor-in-roller electric screen is ideal for auditoriums and lecture halls, hospitals, hotels, churches, boardrooms and conference rooms. The motor is mounted inside the roller on special vibration insulators, so operating noise is dramatically quiet. - Home Family - Furniture - This contemporary motor-in-roller electric screen is ideal for auditoriums and lecture halls, hospitals, hotels, churches, boardrooms and conference rooms. The motor is mounted inside the roller on special vibration insulators, so operating noise is dramatically quiet. - 460756923
- Draper Matte White: Targa Electric Screen With Low Voltage Controller - WideScreen 99 inch diagonal
|
|
Draper Matte White: Targa Electric Screen With Quiet Motor & Low Voltage Controller - WideScreen 99 inch diagonal
This contemporary motor-in-roller electric screen is ideal for auditoriums and lecture halls, hospitals, hotels, churches, boardrooms and conference rooms. The motor is mounted inside the roller on special vibration insulators, so operating noise is dramatically quiet. - Home Family - Furniture - This contemporary motor-in-roller electric screen is ideal for auditoriums and lecture halls, hospitals, hotels, churches, boardrooms and conference rooms. The motor is mounted inside the roller on special vibration insulators, so operating noise is dramatically quiet. - 460756924
- Draper Matte White: Targa Electric Screen With Quiet Motor & Low Voltage Controller - WideScreen 99 inch diagonal
|
|
Chief Manufacturing XpressShip Fusion PLP Series: Universal Pull-N-Tilt Plasma Wall Mount
It's never been easier to install your plasma or LCD screen than with the Fusion Series by Chief. This line of custom mounting solutions combines functionality with low-profile designs. With a variety of fixed and tilt options for multiple screen sizes, you will find a mount that fits your needs! The Fusion Series Mounts include all standard mount features plus several new, industry leading exclusive features. Best of all, any orders for this mount placed before 1:00pm EST will ship out SAME DAY! Features: -Ultra low-profile design fits tight against wall -Patented tilt mechanism provides effortless adjustments and holds screen at any angle -Bottom of mount pulls forward for 3" of cable access -Q-Latch mounting system provides quick connect/disconnect of screen -Portrait or landscape mounting capability -Rapid level system provides hands-free leveling of mount -Integrated lateral shift for a flexible installation -Heavy gauge solid steel construction for ultimate strength -Comes in black -Must be mounted on two studs with 16"/20"/24" centers -Universal interface to accommodate a broader range of screens Specifications: -Tilt adjustment: 0 - 15 degrees -Depth from wall: 1 1/2" + interface bracket -Lateral shift: 4" left/right -Weight capacity: 200 lbs -Dimensions: 18 3/8" H x 26" W x 1 1/2" D NOTE: If you have a 65" Panasonic, you will need an additional PSB bracket. Please call for details. Click Here for a full list of supported mnnitors and the style adapter plate you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico PLP Tilting Plasma Wall Mount Installation Instructions PLP Tilting Plasma Wall Mount Technical Data About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and manufactured at Chief's main headquarters in Minnesota. Most mounts will ship within 24-48 hours: if you need your projector, LCD, or plasma mount fast, give us a call! See All Chief Mounts Need professional installation? Use the Flat Panel Mount Installation Card (for up to 30" screens) or the Chief Manufacturing XpressShip Fusion PLP Series: Universal Pull-N-Tilt Plasma Wall Mount
|
|
Peerless Desktop Triple-screen Mount for 10 inch-22 inch LCD Screens (Unkitted Model)
Limited Stock! The Articulating Multi-Screen LCD Arms allow arrangement of multiple LCD panels in parabolic placement for simultaneous viewing of up to 3 panels. The adjustable cross-arm and pivot mount allow you to put different size panels in various configurations using one level with single pole. Ball joint pivot offers individual adjustments of your LCD panels in tilt, swivel, and swing motion for maximum comfort. The attractively die-cast aluminum body and joint provide superior strength, durability, and the highest quality for commercial applications. Features: -Fits most 10" to 22" LCD screens (Please call for compatibility) -Parabolic viewing of multiple panels -Configuration for mounting 3 flat panels on one level -Adjustable cross-arm and ball joint pivot to fit panels in different sizes -Ball-joint system for rotate, tilt and swing adjustments of individual panels -Reconfigurable design for future expansion -Compatible with VESA 75mm and 100mm LCD panels -Available in black -Mounting options for virtually all desktop surfaces (desktop clamp, desktop bolt, free standing desktop base) -Strong and attractively styled die-cast aluminum alloy construction -Advanced cable management design -Weight Capacity: 25 lbs on every ball joint pivot -Installation requires boltdown accessory (ACC 915), clampdown accessory (ACC 916), or free-standing base (ACC917) Need professional installation? Use the Flat Panel Mount Installation Card (for up to 30" screens) or the Large Flat Panel Mount Installation Card (for over 30" screens)! Give us a call with any questions! - Home Family - Furniture - Limited Stock! The Articulating Multi-Screen LCD Arms allow arrangement of multiple LCD panels in parabolic placement for simultaneous viewing of up to 3 panels. The adjustable cross-arm and pivot mount allow you to put different size panels in various configurations using one level with single pole. Ball joint pivot offers individual adjustments of your LCD panels in tilt, swivel, and swing motion for maximum comfort. The attractively die-cast aluminum body and joint provide superior strength, durability, and the highest quality for commercial applications. Features: -Fits most 10" to 22" LCD screens (Please call for compatibility) -Parabolic viewing of multiple panels -Configuration for mounting 3 flat panels on one level -Adjustable cross-arm and ball joint pivot to fit panels in different sizes -Ball-joint system for rotate, tilt and swing adjustments of individual panels -Reconfigurable design for future expansion -Compatible with VESA 75mm and 100mm LCD panels -Available in black -Mounting options for virtually all desktop surfaces (desktop clamp, desktop bolt, free standing desktop base) -Strong and attractively styled die-cast aluminum alloy construction -Advanced cable management design -Weight Capacity: 25 lbs on every ball joint pivot -Installation requires boltdown accessory (ACC 915), clampdown accessory (ACC 916), or free-standing base (ACC917) Need professional installation? Use the Flat Panel Mount Installation Card (for up to 30" screens) or the Large Flat Panel Mount Installation Card (for over 30" screens)! Give us a call with any questions! - 458915603
- Peerless Desktop Triple-screen Mount for 10 inch-22 inch LCD Screens (Unkitted Model) - on sale
|
|
Chief Manufacturing Pole Pitch-Adjustable Plasma Mount
Quick, easy and versatile, Chief's Truss/Pole Plasma Mount accommodates a large range of truss and pole dimensions, includes security options and provides flexible features to achieve a custom installation for multiple applications. Perfect for exhibit, retail and digital signage applications. Features: -3 Pitch adjustment options - Pitch +/- 15 degrees up or down on gravity-centered axis point. Able to lock down tilt. - Use pre-set Pitch locking points at 0, 5, 10 and 15 degrees to quickly and easily align multiple displays - Install mount horizontally and use Pitch adjustment for side-to-side pivot -Install on vertical or horizontal truss -Attach displays in portrait or landscape mode -Truss/Pole clamps fit a wide variety of truss and pole dimensions (Sold Separately. See Related Products) -Finishing Cover accessories provide aesthetic appeal and cover hardware for added security -Exclusive Q-Latch Mounting System secures the Large Flat Panel Display with a lockable latch to confirm mount stability -Integrated security allows display to be locked to mount by adding a padlock -Dimensions: 16 11/16"H x 16 3/16"W x 3 3/8"D. -Color: Black -Weight Capacity: 150 lbs (Mount capacity only. Be sure pole or truss structure is capable of supporting the weight.) NOTE: If you have a 65" Panasonic, you will need an additional PSB bracket. Please call for details. Two Mounting Methods: 1. Clamp mount to truss or pole(s) using Chief's Clamp Kits. See Related Products. 2. Bolt mount directly to structure using holes centered on mount (Hardware not included). Click Here for a full list of supported monitors and the style adapter plate you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico TPM Pole Plasma Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and manufactured at Chief's main headquarters in Minnesota. Most mounts will ship within 24-48 hours: if you need your projector, LCD, or plasma mount fast, give us a call! See All Chief Mounts Need professional installation? Use the Flat Panel Mount Installation Card (for up to 30" screens) or the Large Flat Panel Mount Installation Card (for over 30" screens)! Give us a call with any questions! - Home Family - Furniture - Quick, easy and versatile, Chief's Truss/Pole Plasma Mount accommodates a large range of truss and pole dimensions, includes security options and provides flexible features to achieve a custom installation for multiple applications. Perfect for exhibit, retail and digital signage applications. Features: -3 Pitch adjustment options - Pitch +/- 15 degrees up or down on gravity-centered axis point. Able to lock down tilt. - Use pre-set Pitch locking points at 0, 5, 10 and 15 degrees to quickly and easily align multiple displays - Install mount horizontally and use Pitch adjustment for side-to-side pivot -Install on vertical or horizontal truss -Attach displays in portrait or landscape mode -Truss/Pole clamps fit a wide variety of truss and pole dimensions (Sold Separately. See Related Products) -Finishing Cover accessories provide aesthetic appeal and cover hardware for added security -Exclusive Q-Latch Mounting System secures the Large Flat Panel Display with a lockable latch to confirm mount stability -Integrated security allows display to be locked to mount by adding a padlock -Dimensions: 16 11/16"H x 16 3/16"W x 3 3/8"D. -Color: Black -Weight Capacity: 150 lbs (Mount capacity only. Be sure pole or truss structure is capable of supporting the weight.) NOTE: If you have a 65" Panasonic, you will need an additional PSB bracket. Please call for details. Two Mounting Methods: 1. Clamp mount to truss or pole(s) using Chief's Clamp Kits. See Related Products. 2. Bolt mount directly to structure using holes centered on mount (Hardware not included). Click Here for a full list of supported monitors and the style adapter plate you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico TPM Pole Plasma Mount Installation Instructions About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and manufactured at Chief's main headquarters in Minnesota. Most mounts will ship within 24-48 hours: if you need your projector, LCD, or plasma mount fast, give us a call! See All Chief Mounts Need professional installation? Use the Flat Panel Mount Installation Card (for up to 30" screens) or the Large Flat Panel Mount Installation Card (for over 30" screens)! Give us a call with any questions! - 459670367
- Chief Manufacturing Pole Pitch-Adjustable Plasma Mount - description
|
Games Toys Stores games-toys-stores.com Lounger bean bags Lounger bean bags and other items and related products
|
Chief Manufacturing PLP Fusion Series: Pull-N'-Tilt Wall Mount (Wall Plate Only)
It's never been easier to install your flat panel screen than with the Fusion Series by Chief. This line of custom mounting solutions combines functionality with low-profile designs. With a variety of fixed and tilt options for multiple screen sizes, you will find a mount that fits your needs! The Fusion Series Mounts include all standard mount features plus several new, industry leading exclusive features. Features: -NOTE:This is just the wall plate for this mount. PSB adapter plate required for installation. -Exclusive Q-Latch Mounting System secures the Large Flat Panel Display with a lockable latch -Ultra low-profile design fits tight against wall -Patented tilt mechanism provides effortless adjustments and holds screen at any angle -Bottom of mount pulls forward for 3" of cable access -Low Profile- 1 5/8" standard mount depth -Display installs in portrait/landscape views -Rapid level system provides hands-free leveling of mount -Tilt of 0-15 degrees (landscape view) -Heavy gauge steel construction: wall mount uses more surface area for balance and stability -Integrated lateral shift for a flexible installation -Must be mounted on two studs with 16"/20"/24" centers -Easy installation with customized bracket for your display. -Must be mounted on two studs with 16"/20"/24" centers. -Comes in a black finish -Weight capacity: 200 lbs -Dimensions: 18 3/8" H x 26" W x 1 1/2" D -Lateral shift: 4" left/right Click Here for a full list of supported monitors and the style adapter plate you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and manufactured at Chief's main headquarters in Minnesota. Most mounts will ship within 24-48 hours: if you need your projector, LCD, or plasma mount fast, give us a call! See All Chief Mounts - Home Family - Furniture - It's never been easier to install your flat panel screen than with the Fusion Series by Chief. This line of custom mounting solutions combines functionality with low-profile designs. With a variety of fixed and tilt options for multiple screen sizes, you will find a mount that fits your needs! The Fusion Series Mounts include all standard mount features plus several new, industry leading exclusive features. Features: -NOTE:This is just the wall plate for this mount. PSB adapter plate required for installation. -Exclusive Q-Latch Mounting System secures the Large Flat Panel Display with a lockable latch -Ultra low-profile design fits tight against wall -Patented tilt mechanism provides effortless adjustments and holds screen at any angle -Bottom of mount pulls forward for 3" of cable access -Low Profile- 1 5/8" standard mount depth -Display installs in portrait/landscape views -Rapid level system provides hands-free leveling of mount -Tilt of 0-15 degrees (landscape view) -Heavy gauge steel construction: wall mount uses more surface area for balance and stability -Integrated lateral shift for a flexible installation -Must be mounted on two studs with 16"/20"/24" centers -Easy installation with customized bracket for your display. -Must be mounted on two studs with 16"/20"/24" centers. -Comes in a black finish -Weight capacity: 200 lbs -Dimensions: 18 3/8" H x 26" W x 1 1/2" D -Lateral shift: 4" left/right Click Here for a full list of supported monitors and the style adapter plate you should select. Chief warrants its products (excluding electric, gas cylinder, and one-way bearing mechanisms) to be free of defects in material and workmanship for 10 years. PLEASE NOTE: This item cannot be shipped to Puerto Rico About Chief Manufacturing For over a quarter of a century, Chief has been an industry leader in manufacturing total support solutions for presentation systems. Chief's commitment to responding to growing industry needs is evident through a full line of mounts, lifts, and accessories for LCD/DLP/CRT projectors and flat panels utilizing plasma and LCD technologies. Chief is known for producing the original Roll, Pitch, and Yaw adjustments in 1978 to make projector mount installation and registration quick and easy. Today, Chief continues to provide innovative mount features, including the first-ever seismic-rated LCD and plasma wall mounts. For the highest quality in AV mounting, no name is trusted more than Chief. All Chief products are designed and manufactured at Chief's main headquarters in Minnesota. Most mounts will ship within 24-48 hours: if you need your projector, LCD, or plasma mount fast, give us a call! See All Chief Mounts - 459776535
- Chief Manufacturing PLP Fusion Series: Pull-N'-Tilt Wall Mount (Wall Plate Only) - more info
|
|
Middle Atlantic DRK Series 3.5 inch W Vertical Lacer Strips
Features: -Mounts vertically to rackrail brackets -Provides ample holes for cable ties -Constructed of perforated steel -Can easily be cut down to smaller sizes -Generous bridge lances for hooks -Sold in packs of 6 -Compatible with 37U space and 44U space rack mounts -Overall Dimensions: 64-3/4" H - 77" H x 3.5" W - Home Family - Furniture - Features: -Mounts vertically to rackrail brackets -Provides ample holes for cable ties -Constructed of perforated steel -Can easily be cut down to smaller sizes -Generous bridge lances for hooks -Sold in packs of 6 -Compatible with 37U space and 44U space rack mounts -Overall Dimensions: 64-3/4" H - 77" H x 3.5" W - 459776757
- Middle Atlantic DRK Series 3.5 inch W Vertical Lacer Strips - for sale
|
|
Middle Atlantic 45 Rackspace (83 3 4 inch High) Aluminum Relay Rack
Features: -Available in standard EIA 19"and 23" width -1600 lb. weight capacity -3/16" extruded aluminum uprights are 12-24 threaded front and rear -Heavy duty 1/4" aluminum base is 15" deep for stability and includes holes for securing to floor -Heavy duty 1/4" thick aluminum top angle provides extra stability for cable ladders -Easy-to-assemble KD design saves on freight -Includes 25 qty 12-24 rackscrews -Full-length cable manager available -Attractive silver brushed aluminum or black powder coat finish -Available in discounted 6 pack quantities - saves money and simplifies ordering and stocking RLA Aluminum Open Frame Rack Specifications - Home Family - Furniture - Features: -Available in standard EIA 19"and 23" width -1600 lb. weight capacity -3/16" extruded aluminum uprights are 12-24 threaded front and rear -Heavy duty 1/4" aluminum base is 15" deep for stability and includes holes for securing to floor -Heavy duty 1/4" thick aluminum top angle provides extra stability for cable ladders -Easy-to-assemble KD design saves on freight -Includes 25 qty 12-24 rackscrews -Full-length cable manager available -Attractive silver brushed aluminum or black powder coat finish -Available in discounted 6 pack quantities - saves money and simplifies ordering and stocking RLA Aluminum Open Frame Rack Specifications - 459776824
- Middle Atlantic 45 Rackspace (83 3 4 inch High) Aluminum Relay Rack in shop
|
|
Middle Atlantic WRK-SA Series 3.5 inch W Vertical Lacer Strips
Features: -Mounts vertically to rackrail brackets -Provides ample holes for cable ties -Constructed of perforated steel -Can easily be cut down to smaller sizes -Generous bridge lances for hooks -Sold in packs of 6 -Compatible with 37U space and 44U space rack mounts -Overall Dimensions: 64-3/4" H - 77" H x 3.5" W - Home Family - Furniture - Features: -Mounts vertically to rackrail brackets -Provides ample holes for cable ties -Constructed of perforated steel -Can easily be cut down to smaller sizes -Generous bridge lances for hooks -Sold in packs of 6 -Compatible with 37U space and 44U space rack mounts -Overall Dimensions: 64-3/4" H - 77" H x 3.5" W - 459776985
- Middle Atlantic WRK-SA Series 3.5 inch W Vertical Lacer Strips on sale
|
|
Middle Atlantic WRK Series 3.5 inch W Vertical Lacer Strips
Features: -Mounts vertically to rackrail brackets -Provides ample holes for cable ties -Constructed of perforated steel -Can easily be cut down to smaller sizes -Generous bridge lances for hooks -Sold in packs of 6 -Compatible with 37U space and 44U space rack mounts -Overall Dimensions: 64-3/4" H - 77" H x 3.5" W - Home Family - Furniture - Features: -Mounts vertically to rackrail brackets -Provides ample holes for cable ties -Constructed of perforated steel -Can easily be cut down to smaller sizes -Generous bridge lances for hooks -Sold in packs of 6 -Compatible with 37U space and 44U space rack mounts -Overall Dimensions: 64-3/4" H - 77" H x 3.5" W - 459776986
- Middle Atlantic WRK Series 3.5 inch W Vertical Lacer Strips on sale
|
|
Copyright 2008 hr11web.com - All rights reserved.
|
